🚀 go-pugleaf

In article <387A3E68.AA653ACE@get2net.dk>, Svend Garnaes
<seg.dantaet@get2net.dk> writes
>Compare /var/log/dmesg on the two boxen to see
>if one has a problem detecting the ports.
>If so, check that the multi port adaptor has
>the same config on both boxen.
>Also, have you checked the nodes in /dev ?
>
Thanks for your help.  The serial port detection is the same on both
boxes.  The nodes in /dev are the same.  

I decided that as I couldn't find a software configuration problem then
the problem must be in hardware.  I've just put in a spare motherboard
(the standard serial ports are on the motherboard) of the same type.
The problem remains.  Getting desperate.
-- 
Martin Liddle, Tynemouth Computer Services, 27 Garforth Close, 
Cramlington, Northumberland, England, NE23 6EW.
Phone: 01670-712624.  Fax: 01670-717324.