🚀 go-pugleaf

In article <387A6C97.FE2DC8EF@get2net.dk>, Svend Garnaes
<seg.dantaet@get2net.dk> writes
>Could still be a syntax error.
>Check that /etc/inittab is the same on the two boxen
>
OK everybody, repeat after me "Martin is an idiot, Martin is an
idiot....".  You are quite right.  I'd only looked at it a million times
without spotting that on the computer that was respawing I'd specified
the port as /dev/ttyS1 where the /dev/ is of course wrong.

One thing I learnt along the way that may help someone is that you only
see an entry in /proc/interrupts when a process is actually using the
associated device.  So the lack of an entry was simply a symptom of
getty not running.

Thank you for your help.
-- 
Martin Liddle, Tynemouth Computer Services, 27 Garforth Close, 
Cramlington, Northumberland, England, NE23 6EW.
Phone: 01670-712624.  Fax: 01670-717324.