🚀 go-pugleaf

In article <4fb08o$2hf6@news-s01.ny.us.ibm.net>
           langdon@ibm.net "James Langdon-Davies" writes:

> How do you set up the Trust 2400 Flatbed Scanner in WIN95 ? 
> Do I need some new drivers ?
> WIN95 doesn't even detect it.
> Thanks in advance
> 
> 

Try the following steps and 'scanner' will work ok....

a) I presume that you already fit the SCSI card in ISA slot....

b) Make sure the SCSI terminator is fitted to the scanner D connector, fit
the cable accordingly, one end to the terminator, the other to the SCSI card
(computer end).

c) Go to control panel / select hardware - SCSI(manually) / select newmedia 
device manufacturer. Give some logical thought when selecting type of SCSI 
card, you can choose Adaptec card if you wish. 

d) Reboot system...

e) Install imagepals Go and limited version Omnipage and start enjoy scanning....

f) Do not remove SCSI terminator from scanner, otherwise it will not detect
SCSI drive/card.

g) If you have paint shop pro and Word 6 or 7 then you can scan image/docs. 
when using these programs. The setup is transparent... 

Hope the above is of help.


-- 
vl