🚀 go-pugleaf

Ive got a problem with the COM4 port. I haven't even got one!
Ive got my mouse on COM1 and my modem on COM2 but when I originally 
boot up Win95 it tells me Ive got COM1 and COM4. When I go in to 
system/device manager and look at the port its got the same Interrupt 
as the COM1 drive. If I got in to the properties/port 
settings/resources it tells me Ive got a conflict with COM1 and then 
automatically sets it correctly and hay presto COM4 disappears and COM2 
appears like a cheeky schoolkid and everythings OK until I reboot....

Anybody got any ideas or am I doomed to change it manually for the rest 
of my life...all this worked OK in 3.11

Config.sys

DEVICE=C:\WINDOWS\HIMEM.SYS /INT15=1000
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
buffers=40,0
FILES=128
DOS=UMB
FCBS=16,8
DEVICEHIGH /L:1,26928 =C:\SB16\DRV\CTSB16.SYS /UNIT=0 /BLASTER=A:220 I:5 D:1 
H:5
DEVICEHIGH /L:1,10416 =C:\SB16\DRV\CTMMSYS.SYS
DEVICEHIGH /L:1,13904 =C:\SB16\DRV\SBCD.SYS /D:MSCD001 /P:220
DEVICEHIGH /L:1,9072 =C:\WINDOWS\COMMAND\ANSI.SYS
DOS=HIGH
DEVICEHIGH /L:1,12048 =C:\WINDOWS\SETVER.EXE
DOS=HIGH
BREAK=ON
shell=C:\COMMAND.COM C:\ /e:1024 /p
device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=044,850,C:\WINDOWS\COMMAND\country.sys

Autoexec

@echo off
SET SOUND=C:\SB16
SET BLASTER=A220 I5 D1 H5 P330 T6
SET MIDI=SYNTH:1 MAP:E
C:\SB16\DIAGNOSE /S
C:\SB16\MIXERSET /P /Q
rem - By Windows Setup - LH /L:1,46544 C:\WINDOWS\COMMAND\MSCDEX.EXE 
/D:MSCD001 /V /M:15
C:\CLUTIL\CLMODE m2
LH /L:1,49776 C:\TOOLKIT\GUARD
PROMPT $p$g
PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\;C:\DS;C:\DOS;C:\XTG
SET ORIGPATH=%PATH%

LH /L:1,17904 C:\DOS\FMOUSE
REM LH /L:1,13984 SHARE.EXE /F:4094 /L:30
LH /L:1,6384 C:\WINDOWS\COMMAND\DOSKEY

mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
mode con codepage select=850
keyb uk,,C:\WINDOWS\COMMAND\keyboard.sys


=========================================================================
Michael McSkeane
mmc@schemed.demon.co.uk