nec e606 -> dblock error

Thread View: uk.telecom.mobile

5 messages

[T] Back to Threads [V] Tree View [G] Group Articles

5 total messages Started by Scott Harrison Mon, 16 Jun 2003 13:42

#99

Author: Scott Harrison
Date: Mon, 16 Jun 2003 13:42

13 lines
1273 bytes

Hi All,

I've just installed the software for my Nec e606 on Windows XP. When I
try to upload anything I get a "Data Transfer Failed. (DBLOCK)" error.

Can't find anything in the doco. Has anyone else come across this ?

I believe I've selected the correct port, as if I turn the phone off
and try it I get a communications failed error.

Any help would be appreciated.

Scott.

Re: nec e606 -> dblock error

#95

Author: Sonny Foster
Date: Mon, 16 Jun 2003 23:16

32 lines
1949 bytes

In article <eca364e0.0306160542.12f524c@posting.google.com>,
 sg_harrison@yahoo.com (Scott Harrison) wrote:

> Hi All,
> 
> I've just installed the software for my Nec e606 on Windows XP. When I
> try to upload anything I get a "Data Transfer Failed. (DBLOCK)" error.
> 
> Can't find anything in the doco. Has anyone else come across this ?
> 
> I believe I've selected the correct port, as if I turn the phone off
> and try it I get a communications failed error.
> 
> Any help would be appreciated.
> 
> Scott.

Scott,

You need to make sure of the following:

1. You phone is set-up to communicate with your PC. I think it's the 
bottom right menu option from memory; and

2. You have made sure the port you select when you run the software 
aligns with where the e606 drivers were installed. You can check this by 
going into your Systems HArdware configuration and check which COM port 
the software was alloacted.

Good luck.

SF

Re: nec e606 -> dblock error

#96

Author: David
Date: Tue, 17 Jun 2003 01:11

22 lines
1632 bytes

Make sure your computer is in Connect mode (Menu 9-2)

You may need to authenticate on both the PC and the phone if you have
an older firmware version.

David


sg_harrison@yahoo.com (Scott Harrison) wrote in message news:<eca364e0.0306160542.12f524c@posting.google.com>...
> Hi All,
> 
> I've just installed the software for my Nec e606 on Windows XP. When I
> try to upload anything I get a "Data Transfer Failed. (DBLOCK)" error.
> 
> Can't find anything in the doco. Has anyone else come across this ?
> 
> I believe I've selected the correct port, as if I turn the phone off
> and try it I get a communications failed error.
> 
> Any help would be appreciated.
> 
> Scott.

Re: nec e606 -> dblock error

#97

Author: Entropy
Date: Tue, 17 Jun 2003 03:49

16 lines
1509 bytes

sg_harrison@yahoo.com (Scott Harrison) wrote in message news:<eca364e0.0306160542.12f524c@posting.google.com>...
> I've just installed the software for my Nec e606 on Windows XP. When I
> try to upload anything I get a "Data Transfer Failed. (DBLOCK)" error.

Hi Scott, 

The message means DataBase Lock, which means you need to tell the
phone to go into transfer mode - Menu - 9 - 2 (took me a few days to
work that one out)

version 1.5 of the NEC software (at www.aussie3g.com) gives a better
error message.

Lots of other good info at that site too :)

Brock

Re: nec e606 -> dblock error

#98

Author: newbie
Date: Tue, 17 Jun 2003 09:33

7 lines
1248 bytes

On 16 Jun 2003 18:11:45 -0700, retro_neo@yahoo.com.au (David) wrote:

>You may need to authenticate on both the PC and the phone if you have
>an older firmware version.

How do you get the firmware updated? do you take the handset back to
the shop or the repair facility? can it be downloaded perhaps?

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads