🚀 go-pugleaf

In article <31348875.71B8@asiaonline.net>, alexc@asiaonline.net says...
>
>Can anyone help me I want to Play VCD under windows 95
>but I got the error massage " MMSystem error " when play *.dat files
>and *.mpg can play WHY ? ?? ????
I also have this problem before but I am using XING instead.  You can follow 
the following instruction which is included with the XING 1.3:

-------- BEGIN ---------
- Type the CONFIG.SYS file on the root of your Windows 95 boot drive,
  and note the line that loads your PC's CD-ROM driver; e.g., the
  following command types the config.sys file:
    type c:\config.sys
  And the following line loads the CD-ROM driver:
    DEVICE=C:\UTILS\SCSI\ASPICD.SYS /D:ASPICD0
- Edit the AUTOEXEC.BAT file on the root of your Windows 95 boot drive,
  and add a line that loads the MSCDEX program, e.g.:
    <PATH>MSCDEX.EXE /D:<DRIVER>
  Where <PATH> is the path to the MSCDEX program,
  and <DRIVER> is the name of the driver specified in your PC's
  CONFIG.SYS file, e.g.:
    C:\WINDOWS\COMMAND\MSCDEX.EXE /D:ASPICD0
- Edit the IOS.INI in your PC's Windows 95 directory, and find 
  the line that specifies your PC's CD-ROM driver, e.g.:
    aspicd.sys	; adaptec PM driver exists
  If this line appears in the [SafeList] section of the file, move it from
  the [SafeList] section to the [CDUnsafe] section; e.g.: after you move
  the line, your IOS.INI file should have lines that look like this:
    [CDUnsafe]
    aspicd.sys	; adaptec PM driver exists
- Reboot your PC.

At this point, if problems persist, try diabling 32-bit disk access:
- Run the SYSTEM control panel
- Go to the PERFORMANCE panel
- Click the "File System" button
- Go to the "Troubleshooting" panel
- Enable the option: "Disable all 32-bit Protect Mode Disk Drivers"
- Reboot your PC
----------- END -----------

Hope the above information will solve your problem, like me.

Regards,
Anthony Chong