Thread View: usc.list.novell
1 messages
1 total messages
Started by Michael Tsurikov
Sat, 12 Feb 1994 02:06
** Dayna DL2000 problems **
Author: Michael Tsurikov
Date: Sat, 12 Feb 1994 02:06
Date: Sat, 12 Feb 1994 02:06
19 lines
1891 bytes
1891 bytes
I'm posting this after very, very many tries at fixing my problem... I installed a Dayna DL2000 LocalTalk Adapter card into my Novell server (a Compaq ProSignia running NW3.12, 250-user) -- and for the life of me, I can't get the DL2000 module to load! Every time I ask to load it, it spits back a "LocalTalk hardware failure. Module DL2000 NOT loaded." message. My interrupt and IRQ settings are right (240,5, same as on the card). I plugged a LocalTalk connector into the thing and connected it to a Mac. I tried different interrupts/IRQs. I called Dayna. I called our network people at USC who use this card. I even downloaded the most recent DL2000 driver (3.17 at the time.) NOTHING. Nothing I try gets rid of that pesky message. Can anyone offer some insight? THANKS so much, in advance! --Michael Tsurikov USC Student Affairs Computer Specialist tsurikov@usc.edu
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads