T1600 and CompuServe

Thread View: uunet.forum

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Aditya Talwar Thu, 10 Sep 1992 14:59

#44

Author: Aditya Talwar
Date: Thu, 10 Sep 1992 14:59

70 lines
2810 bytes

Hi Eric, thanks for your input,
You mentioned....

>I called CIS and they were not aware of any problems or changes with the
>line.   While I was on hold, I tried calling with my T2500...
> 
> ats50=6s111=0dt9,17136505143
> RRING
>
> CONNECT 9600/LAPM
>   
> ...etc...  (you know what I don't put here)
>				    
> UUNET Communications Services (uunet)
>					     
> login: 
>
>The person on the other end said they had USR96e modems installed on that
>line (pretty generic V.32 modem).
>						       
> Make sure you have set:
>				
> S50=6   Use V.32
> S94=0   Don't allow fallback to lower speeds
> S111=0  Turn off spoofing
>

Here are my T1600 modems which worked before CompuServe swiched telephone
numbers, and they are similar to the one somebody else had on the net, which
worked for him.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
algol::root> tip cub0
connected
at &v
T1600 - Version LA1.00  - Active Configuration
 B1  E1  L2  M1  P   Q2  V1  X1  Y0 
 &C1 &D3 &G0 &J0 &L0 &Q0 &R3 &S1 &T4 &X0 
 S000:1   S001=0   S002=43  S003=13  S004=10  S005=8   S006=2   S007=40 
 S008=2   S009=6   S010=14  S011=70  S012=50  S018=0   S025=5   S026=1  
 S038=0   S041=0   S045=0   S046=0   S047=4   S048=0   S050=0   S051:254
 S056=17  S057=19  S058:0   S059:1   S060=0   S061:0   S062=15  S063=0  
 S064:1   S068:3   S069=0   S090=0   S093=8   S094=1   S100=0   S102=0  
 S104=0   S105=1   S111:0   S112=1   S180=2   S181=1   S183=25  S190=1  
 S253=10  S254=0   S255=255 
 OK
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

I tried your suggestion, and here is how it went....
\\\\\\\\\\\\\\\\\\\\\\\\\\
ats50=6s94=0s111=0
OK
atdt6505143
NO CARRIER
\\\\\\\\\\\\\\\\\\\\\\\\\\\

However, the T1600 can communicate with T2500 modes, and presently I have
a INTEL modem communicating with Compuserve at 9600 baud.
I have tried other settings, but none of them work.
I tried calling Telebit a couple of times but got tired of waiting for
an engineer and unfortunately their phone mailbox was full so I could not
leave my message. So my humble request remains, if anyone able to communicate
with their T1600 to CompuServe's USRobotics modem, if so please send me your
S register settings. Or, please send me your T2500 settings.


Sincerely
atalwar@geoquest.com

..My feet are hot, but my body is cold, on the average I feel okay........

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads