UUNET-CIS link error corrected?

Thread View: uunet.forum

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by robert Wed, 11 Nov 1992 17:08

#54

Author: robert
Date: Wed, 11 Nov 1992 17:08

21 lines
1375 bytes

I've been tuning my UUCP-g transfers via the Dallas CIS HUB.  

I'm using a Hayes Ultra with V.32 and V.42 error control (compression disabled)
UUCP-g is set to 7 windows of 512 bytes.  

Every once in a while, I get checksum and bad header messages on 
packets received from CIS.  Since I'm using V.42 how can I get data errors?
I've already checked for flow control problems on my end, so the only
think I can think of is the CIS<>UUNET link isn't error corrected.

On packets to UUNET, I have a lot of timeouts.  Does CIS have flow control
with UUNET?  Is the CIS -> UUNET path lower bandwidth?

What's the scoop?  (BTW I'm getting ~850 CPS inbound, ~300 outbound, so 
I don't have THAT much to complain about.)

-------------------------------------------------------------------------
Robert Eden    817-897-0491                                 Glen Rose, TX
Comanche Peak Steam Electric Station            robert@cpvax.cpses.tu.com
               ^^^^^^^^^^^^^^^^^^^^^ politicese for a nuke plant
-------------------------------------------------------------------------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads