Printer won't come up under Ultrix...

Thread View: vmsnet.sysmgt

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Dick Munroe Mon, 03 Aug 1992 11:31

#32

Author: Dick Munroe
Date: Mon, 03 Aug 1992 11:31

28 lines
1536 bytes

I'm posting this for someone who doesn't have access to VMSNET.  Please
reply to rane@saathi.ncst.ernet.in.  I'm going to try changing the reply-to
address to direct mail to him.
--------------------------------------------------------------------------------
From: <rane@saathi.ncst.ernet.in>
To: munroe@dmc.com
Subject: Re: Info-VAX Monthly Posting, Part 1 of 3
Newsgroups: vmsnet.misc,comp.os.vms,news.answers
In-Reply-To: <info-vax-1.19920802.080222@dmc.com>
Organization: National Centre for Software Technology, Bombay, India.
CC: 

I have facing one problem on VAX8600 running ULTRIX.
i am not able to bring up Line printer on VAX8600.
When i tried to put the LP11/LS11 controller on unibus
it says I/O error.What does it mean?
Controller card is showing in configuration with
prpoer CSR and vector setting.Whether it is a
printer problem or Lp11 controller problem?
How to find out that? We have ULTRIX 4.2 running.

-- 
Dick Munroe				Internet: munroe@dmc.com
Doyle Munroe Consultants, Inc.		UUCP: ...uunet!thehulk!munroe
267 Cox St.				Office: (508) 568-1618
Hudson, Ma.				FAX: (508) 562-1133

GET CONNECTED!!! Send mail to info@dmc.com to find out about DMConnection.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads