Thread View: vmsnet.tpu
1 messages
1 total messages
Started by williams
Tue, 10 Nov 1992 13:13
^U versus ^X
Author: williams
Date: Tue, 10 Nov 1992 13:13
Date: Tue, 10 Nov 1992 13:13
39 lines
2647 bytes
2647 bytes
> From: WVNET::IN%"ldgiltne@wsuhub.uc.twsu.edu" 10-NOV-1992 00:17:59.38
> Subj: Problems with SET GOLD KEY
>
> I have all the Ctrl keys defined that were not
> "reserved" by TPU or VMS.
...And a few that *are* reserved by VMS. See below.
>
> Both Ctrl-X and Ctrl-U acted as gold keys.
> Are these two keys tied together somehow?
Yes.
The VMS terminal driver uses ^U as an 'Un-type this line'
key -- it deletes to the beginning of the line.
^X is a little more subtle: DEC uses ^X for the 'clear
*all* pending input' key. If there is input in the
type-ahead buffer, it is cleared. If there is nothing in
the type-ahead buffer, then the terminal driver treats ^X as
if it were ^U.
As a matter of fact, when you press ^X, TPU will not see it.
The terminal driver will pass a ^U to TPU. For proof, use
the EVE command SHOW KEY, and press ^X. You will be told
that "CTRL/U is defined as blah blah blah".
All of this is on the assumption that you have a
more-or-less normal terminal setup. I suspect that if you
are running in PASTHRU or PASSALL mode (don't attempt this
at home :-), the ^X will be passed as is.
I hope this helps....
-Tom Williams
Computer Center Manager
Alderson-Broaddus College
WILLIAMS@AB.WVNET.EDU
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads