🚀 go-pugleaf

We have recently installed a patch to our 56k modem that should add more
stability. When you are trying to connect and the modem (on our end)
determines that the line quality is not good enough to go above 33.6, it
will inhibit 56k and connect at the highest speed possible. (33.6 and
below) Before the patch was installed, you would often achieve unreliable
connections at speeds over 33.6. Instead of allowing these unstable
connections, the modem will drop down to a steady connect speed. 

If you experience any problems connecting to the 56k modems, please go to:
http://56k.microserve.net and fill out the web form. 


-Lou






~\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Louis S. Lau			      	| MicroServe        >
----------------------------------------| Web Developer     >
louis@admin.microserve.net	      	| Technical Support >
http://www.microserve.net/~louis      	| Programmer	    >
1-800-380-INET   			| Graphic Design    >
------------------------------------------------------------>
"So Let It Be Written, So Let It Be Done..."                >
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/

WARNING : This is a commercial email address.  I reserve the right to bill
any spammers for the time it takes me to delete their email.  Total
billing will be no less than $10 per email.

-- 
About this listserv: http://home.microserve.net/listserv
    Acceptable Uses: http://www.naispa.org/aup