🚀 go-pugleaf

--------------C97C121AD96BFDB690F13841
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I had a bunch of problems with Fdisk and redhat.  It would reconize my linux
partition as an "extended dos partition" an absolutely refused to do anything with
it.  I had to download another partitioning utility to nuke that partition.

There is also "fdisk /mbr" that will restore the MBR

For a Dual Boot, if you use M$ windows :( , you will have to install all of that
crap FIRST , then install linux.  You can tell the install program to write LILO
to the MBR and it will pick up the M$ stuff too.  If you don't install win first,
you won't be able to boot linux except off of a boot disk.

The most important thing is to make sure all of the partitions are GONE before you
start.

I'm running w95 and RH6.1 and it works fine for dual boot that way.

If your BIOS will support it, change it to boot from CD.  That makes a RH install
quick & easy.

I'm still fairly new at RH, but it's WAAAAYYYYY better than the M$ crap!

Hope this helps......
Derek Whitten
www.skynary.com/roofcleaner



"Joseph L. Suttie III" wrote:

> cannot speak towards the first problem, but my mandrake version was finiky with
> the MBR too.  (I now use Red Hat only because there are several O'Reilly books
> on running red hat).  To get around the problem with the hard drive in mandrake
> use a win98 boot disk with fdisk, and remove all partions (makes the disk
> totally un formatted and leaves no trace of microsoft crap) the install should
> take.  If you are doing dual boot, I cannot help, accept maybe use fdisk to
> clear any partions in the area you will be putting linux, let linux 'fdisk' the
> area.  Mandrake has issues with removing/reconfiguring active microsoft written
> partions.  At least in the version I had (older than yours,  Linux 6.1 mandrake
> 6.5.
>
> Minh Cam NGHE wrote:
>
> > Hi,
> >
> > I have installed Redhat 6.2 onto my Acer TravelMate 500T laptop. But
> > haven't managed to get it working. My problem is this:
> >
> > 1.) the installattion completes with no hassles
> > 2.) after it re-boots to start up linux for the first time, it hangs after
> >     this line:  'apm: BIOS version 1.2 Flag 0x0f (Driver version1,9); give
> > me a
> >     general protection fault, and a stack dump is given as well as some
> > other hex
> >     codes
> >
> > I have tired many stuffs to overcome this:
> >
> > 1.) using seperate partitions for, eg, /, /boot, /usr, /usr/local etc.
> > 2.) using a single partition- / for the installation
> > 3.) using the GUI and text installation
> > 4.) Tried installing Mandrake Linux 6.0 (but the installation had trouble
> >      writing LILO to the MBR or the first sector of hda1.)
> >
> > But yet sttill no luck. Here are my specs for the laptop:
> >
> > ->  233 mmx
> > -> 32mB Ram
> > -> 3G HD
> > -> 2mB NeoMagic graphic card
> > -> Yamaha sound card
> >
> > Does anything have any suggestions, solutions or work arounds because I've
> > stucked! Have yet to try and install early version of redhat. Please direct
> > your assistances to my email address: minh@zeta.org.au or post a reply to
> > me.
> >
> > Many thanxs for your help.
> >
> > Regards, Minh =)

--------------C97C121AD96BFDB690F13841
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
I&nbsp;had a bunch of problems with Fdisk and redhat. &nbsp;It would reconize
my linux partition as an "extended dos partition" an absolutely refused
to do anything with it.&nbsp; I had to download another partitioning utility
to nuke that partition.
<p>There is also "fdisk /mbr" that will restore the MBR
<p>For a Dual Boot, if you use M$ windows :( , you will have to install
all of that crap FIRST , then install linux.&nbsp; You can tell the install
program to write LILO to the MBR and it will pick up the M$ stuff too.&nbsp;
If you don't install win first, you won't be able to boot linux except
off of a boot disk.
<br><br>
<font color="#FF0000">The most important thing is to make sure all of the
partitions are GONE before you start.</font>
<p>I'm running w95 and RH6.1 and it works fine for dual boot that way.
<p>If your BIOS will support it, change it to boot from CD.&nbsp; That
makes a RH install quick &amp; easy.
<p>I'm still fairly new at RH, but it's WAAAAYYYYY better than the M$ crap!
<p>Hope this helps......
<br>Derek Whitten
<br><a href="http://www.skynary.com/roofcleaner">www.skynary.com/roofcleaner</a>
<br>&nbsp;
<br>&nbsp;
<p>"Joseph L. Suttie III" wrote:
<blockquote TYPE=CITE>cannot speak towards the first problem, but my mandrake
version was finiky with
<br>the MBR too.&nbsp; (I now use Red Hat only because there are several
O'Reilly books
<br>on running red hat).&nbsp; To get around the problem with the hard
drive in mandrake
<br>use a win98 boot disk with fdisk, and remove all partions (makes the
disk
<br>totally un formatted and leaves no trace of microsoft crap) the install
should
<br>take.&nbsp; If you are doing dual boot, I cannot help, accept maybe
use fdisk to
<br>clear any partions in the area you will be putting linux, let linux
'fdisk' the
<br>area.&nbsp; Mandrake has issues with removing/reconfiguring active
microsoft written
<br>partions.&nbsp; At least in the version I had (older than yours,&nbsp;
Linux 6.1 mandrake
<br>6.5.
<p>Minh Cam NGHE wrote:
<p>> Hi,
<br>>
<br>> I have installed Redhat 6.2 onto my Acer TravelMate 500T laptop.
But
<br>> haven't managed to get it working. My problem is this:
<br>>
<br>> 1.) the installattion completes with no hassles
<br>> 2.) after it re-boots to start up linux for the first time, it hangs
after
<br>>&nbsp;&nbsp;&nbsp;&nbsp; this line:&nbsp; 'apm: BIOS version 1.2 Flag
0x0f (Driver version1,9); give
<br>> me a
<br>>&nbsp;&nbsp;&nbsp;&nbsp; general protection fault, and a stack dump
is given as well as some
<br>> other hex
<br>>&nbsp;&nbsp;&nbsp;&nbsp; codes
<br>>
<br>> I have tired many stuffs to overcome this:
<br>>
<br>> 1.) using seperate partitions for, eg, /, /boot, /usr, /usr/local
etc.
<br>> 2.) using a single partition- / for the installation
<br>> 3.) using the GUI and text installation
<br>> 4.) Tried installing Mandrake Linux 6.0 (but the installation had
trouble
<br>>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; writing LILO to the MBR or the first
sector of hda1.)
<br>>
<br>> But yet sttill no luck. Here are my specs for the laptop:
<br>>
<br>> ->&nbsp; 233 mmx
<br>> -> 32mB Ram
<br>> -> 3G HD
<br>> -> 2mB NeoMagic graphic card
<br>> -> Yamaha sound card
<br>>
<br>> Does anything have any suggestions, solutions or work arounds because
I've
<br>> stucked! Have yet to try and install early version of redhat. Please
direct
<br>> your assistances to my email address: minh@zeta.org.au or post a
reply to
<br>> me.
<br>>
<br>> Many thanxs for your help.
<br>>
<br>> Regards, Minh =)</blockquote>
</html>

--------------C97C121AD96BFDB690F13841--