🚀 go-pugleaf

ok mark, what version is your n-gage *#0000# ? mine is v.3.30 28-8-03

what OS are you using?

what version of Belkin Driver are you using?

and in the Belkin Software do this....

 right click the belkin bluetooth icon in the systray...advance
configuration.....local services.....select Network Services and click
properties....then in the drop down box....make sure you have
"Allow other devices to access the Internet/Lan via this computer"
selected....

and i clicked Configure Internet Connection Sharing button at the bottom too
but it did nothing...but i suspect it changed some registry
entries....doesnt hurt to press it once at least....

go back and connect again....btw when i connect the serial port....the
bluetooth icon (black ball on the ngage gets 2 brackets around it while its
connected to the net...as well as the letter G in the top right hand
corner...

I DONT have ICS installed too btw....you dont need it...

let me know how you go bro...

cheers ;)

"Mark." <m.nikia#optusnet.com.au> wrote in message
news:3ff9f5cb$0$18746$afc38c87@news.optusnet.com.au...
> Specs followed to the letter.
> Continuously: "Connecting via PC" and "GPRS unavailable. Check operator
> services."
> Fuckin hell.
> -mark
>
> "a_dude" <blax@blox.com> wrote in message
> news:btc49t$5ov$1@otis.netspace.net.au...
> > ah fuck it...heres a cut down version of the details....
> >
> > 1st Part
> > --------
> >
> > Creating an access point on the Ngage
> >
> > tools....settings...connection....access points....options...new access
> > point>default settings...
> >
> > Enter the following...
> >
> > Connection Name : Anything (But remeber this name cuz ull enter it in
> > various programs that require the net) THIS IS YOUR ACCESS POINT NAME
> >
> > Data Bearer: GPRS
> >
> > Access Point Name: The name you gave your bluetooth conected
> computer...but
> > to be honest ive put anything in here and it still works.....
> >
> > Username : None
> >
> > Password : No
> >
> > Authentication : Normal
> >
> > Gateway IP Address : 0.0.0.0
> >
> > leave the advance settings alone....
> >
> > and this should create your access point name....
> >
> >
> > ---------------
> > 2nd Part
> >
> > This applies to the Belkin Bluetooth Software but could be similar for
> other
> > bluetooth USB devices....
> >
> > the magic sequence is to make sure the belkin software connects to
> > the serial port with the ngage....
> >
> > right click the bluetooth icon in the systray....
> >
> > quick connect....bluetooth serial port....other devices.....
> >
> > now if youve paired them correctly the name of your ngage will come
up...
> > select it
> >
> > and let it connect
> >
> > it might come up with an error....ignore it and press ok.... mine says
it
> > connects to COM0 ...
> >
> > if you have PC Suite installed look at the mrouter icon.... 2 grey
> triangles
> > change colour when it connects....or changes to another graphic of a
> > computer or phone....success!
> >
> > so far so good...
> >
> > 3rd and last fucken part.....
> >
> > The browser that comes with the ngage is a crap piece of shit and wont
> work
> > through the above setting...neither will RealOne Player when trying to
> > stream....but im working on these 2 now as we speak....
> >
> > Grab Netfront Browser....and install it on your Ngage.....
> > its here > http://www.access-sys-eu.com/NetFront_for_Series.410.0.html
> >
> > When you enter the web the first time...it asks which access point to
> > use....use the one you created above...under connection name...it should
> be
> > in the list....
> >
> > I'll see ya on the net ;)
> >
> > cheers ;)
> >
> >
> > "a_dude" <blax@blox.com> wrote in message
> > news:bt90ug$1hmn$2@otis.netspace.net.au...
> > > Woot!
> > >
> > > Now i can access my email via my ngage and no GPRS or WAP charges ...
> > >
> > > cheers ;)
> > >
> > >
> > >
> >
> >
>
>