🚀 go-pugleaf

also can you check these settings for me on your Ngage.....

tools.....settings....connection...select GPRS

GPRS Connection...set to 'When Available'

Access Point ... <Computer Name> here enter the name of your computer as
reported by the Belkin Software....

please let me know at what stage you succeed.....

cheers ;)


"a_dude" <blax@blox.com> wrote in message
news:btda3r$lpe$1@otis.netspace.net.au...
> ok mark, what version is your n-gage *#0000# ? mine is v.3.30 28-8-03
>
> what OS are you using?
>
> what version of Belkin Driver are you using?
>
> and in the Belkin Software do this....
>
>  right click the belkin bluetooth icon in the systray...advance
> configuration.....local services.....select Network Services and click
> properties....then in the drop down box....make sure you have
> "Allow other devices to access the Internet/Lan via this computer"
> selected....
>
> and i clicked Configure Internet Connection Sharing button at the bottom
too
> but it did nothing...but i suspect it changed some registry
> entries....doesnt hurt to press it once at least....
>
> go back and connect again....btw when i connect the serial port....the
> bluetooth icon (black ball on the ngage gets 2 brackets around it while
its
> connected to the net...as well as the letter G in the top right hand
> corner...
>
> I DONT have ICS installed too btw....you dont need it...
>
> let me know how you go bro...
>
> cheers ;)
>
> "Mark." <m.nikia#optusnet.com.au> wrote in message
> news:3ff9f5cb$0$18746$afc38c87@news.optusnet.com.au...
> > Specs followed to the letter.
> > Continuously: "Connecting via PC" and "GPRS unavailable. Check operator
> > services."
> > Fuckin hell.
> > -mark
> >
> > "a_dude" <blax@blox.com> wrote in message
> > news:btc49t$5ov$1@otis.netspace.net.au...
> > > ah fuck it...heres a cut down version of the details....
> > >
> > > 1st Part
> > > --------
> > >
> > > Creating an access point on the Ngage
> > >
> > > tools....settings...connection....access points....options...new
access
> > > point>default settings...
> > >
> > > Enter the following...
> > >
> > > Connection Name : Anything (But remeber this name cuz ull enter it in
> > > various programs that require the net) THIS IS YOUR ACCESS POINT NAME
> > >
> > > Data Bearer: GPRS
> > >
> > > Access Point Name: The name you gave your bluetooth conected
> > computer...but
> > > to be honest ive put anything in here and it still works.....
> > >
> > > Username : None
> > >
> > > Password : No
> > >
> > > Authentication : Normal
> > >
> > > Gateway IP Address : 0.0.0.0
> > >
> > > leave the advance settings alone....
> > >
> > > and this should create your access point name....
> > >
> > >
> > > ---------------
> > > 2nd Part
> > >
> > > This applies to the Belkin Bluetooth Software but could be similar for
> > other
> > > bluetooth USB devices....
> > >
> > > the magic sequence is to make sure the belkin software connects to
> > > the serial port with the ngage....
> > >
> > > right click the bluetooth icon in the systray....
> > >
> > > quick connect....bluetooth serial port....other devices.....
> > >
> > > now if youve paired them correctly the name of your ngage will come
> up...
> > > select it
> > >
> > > and let it connect
> > >
> > > it might come up with an error....ignore it and press ok.... mine says
> it
> > > connects to COM0 ...
> > >
> > > if you have PC Suite installed look at the mrouter icon.... 2 grey
> > triangles
> > > change colour when it connects....or changes to another graphic of a
> > > computer or phone....success!
> > >
> > > so far so good...
> > >
> > > 3rd and last fucken part.....
> > >
> > > The browser that comes with the ngage is a crap piece of shit and wont
> > work
> > > through the above setting...neither will RealOne Player when trying to
> > > stream....but im working on these 2 now as we speak....
> > >
> > > Grab Netfront Browser....and install it on your Ngage.....
> > > its here > http://www.access-sys-eu.com/NetFront_for_Series.410.0.html
> > >
> > > When you enter the web the first time...it asks which access point to
> > > use....use the one you created above...under connection name...it
should
> > be
> > > in the list....
> > >
> > > I'll see ya on the net ;)
> > >
> > > cheers ;)
> > >
> > >
> > > "a_dude" <blax@blox.com> wrote in message
> > > news:bt90ug$1hmn$2@otis.netspace.net.au...
> > > > Woot!
> > > >
> > > > Now i can access my email via my ngage and no GPRS or WAP charges
...
> > > >
> > > > cheers ;)
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>