🚀 go-pugleaf

Since more than one modem seems to suffer, I suspect a conflict in the I/O
ports area. Could just be an address. Installing a new modem which is pnp
(recognized by Win95 on installation) sometimes causes these conflicts,
certainly if you manually set some parameters earlier to make other things
work,
Check out the Control Panel-System-Device Manager- all options.

Meat Loaf wrote:

> On Wed, 01 Jul 1998 14:13:56 -0700, Steve Courtney
> <swcourtney@earthlink.net> wrote:
>
> >Hello People!!
> > I'm having a problem with losing my modem on shut down. I used to have
> >a 33.6 that gave me no problems, then I installed a Shark Multimedia
> >Leopard 56k that a friend gave me, it was practically new.
> > When I shut down and start up the next time, my modem is there but the
> >computer can't communicate with it. I run modem diagnostics in Control
> >panel-Modems and it tells me Modem not responding and shows no info in
> >box. If I just reboot, I don't lose it, it's only when I power down. To
> >get it back, I have to remove it from Modems and reboot, then windows
> >sees it and installs it and I'm ok till next time.
>
> I have the same problem with my cardinal modem. I'd be intrested to
> seeing the reply to this.
> > I've checked Sharks web in the past (today I can't get to it, it seems
> >to be down) and I've checked MicroSoft's and can't find any info on this
> >problem.
> >
> > Any help would be greatly appreciated!!!
> >  Thank you in advance.
> >Steve
> >
> >*****Please respond by email*****
> >
> >
> >
> >
> >"The distinction between past, present, and future
> > is only a stubbornly persistent illusion."
> >Author: Albert Einstein
> >
>