🚀 go-pugleaf

EddNog,
I have a similar setup with the exception that I have an Entagen 7 port powered
USB hub and am using two Corsair 128MB PC100 DIMMs. I am running successful at
3.5X100.

You may have a problem with too much sh*t in your computer and not enough memory
to support it. I can't believe you skimped on the memory...

Sorry for the sarcasm... Suggest you strip it down to the minimum video and
SDRAM and see if it boots at 3.5X100. Then add the WD hard disk and see if it
gets into windows and is stable.... Then start adding all the good stuff until
it fails.

I don't think your going to get a good answer like "Move DIMM to slot 1",
"update BIOS ROM to 1006" until you slim down the pickings.

Quite a rig you have there.....
regards,
karl


EddNog wrote:

> I can't seem to overclock my system properly.  If anyone else has had
> problems overclocking their system and have similiar components, please tell
> me what you did and what component it is.  This is my rig:
>
> PC Power & Cooling Personal Midtower Case w/ATX Power Supply
> Asus P5A w/out Integrated Audio (BIOS ROM revision 1005)
> AMD K6-2/300@3.0x100
> PNY 64MB PC100 CAS3 8NS SDRAM DIMM (DIMM Slot 0)
> Western Digital 6.4GB U/DMA U/ATA EIDE hard drive [AC36400]
> Kenwood 40x40 ATAPI EIDE CD-ROM reader [UCR-401, ROM revision 106B]
> Pioneer 32X Slot-Loading SCSI-2 CD-ROM reader [DR-U06S] (ID #2)
> Iomega Zip Insider 100 ATAPI IDE Zip drive
> Plain old Mitsumi 1.44" floppy drive (on Floppy Channel)
> Adaptec AHA-2930B Retail PCI SCSI adapter
> Creative Labs Sound Blaster Live! Retail PCI sound adapter
> Creative Labs 3D Blaster Voodoo2 12MB PCI graphics accelerator adapter
> Matrox Millennium G200 8MB AGP video accelerator adapter [ROM revision 1.6]
> Matrox Rainbow Runner G-Series PCI TV-Tuner add-in adapter
> Logitech MouseMan+ bus mouse (on PS/2 Bus Mouse Port)
> Plain old Mitsumi 104-key keyboard (on PS/2 Bus Keyboard Port)
> ADI MicroScan 6P 19" monitor w/unpowered USB hub
> Canon BJC-5000 color thermal inkjet printer (on LPT1)
> 3Com U.S.Robotics 56K v.90 external analogue modem (on COM1)
> Microsoft Precision Pro digital USB joystick (on MicroScan USB Hub)
> Microsoft Freestyle Pro digital USB gamepad (on MicroScan USB Hub)
> Umax Astra 1220S color flatbed SCSI scanner (ID #5 on Adaptec 2930)
>
> I'm trying to raise the multiplier to 3.5, but it won't boot; not even POST.
> It's working just fine as it is now, but I'd really like to use it at 350.
> Raising the bus rate does not yield happy results.
>
> -Ed (eddnog@mindspring.com)