🚀 go-pugleaf

Well I got my sound working, but I had to pluck down $52.95 for a SB Live!
Value to do it!  I'm happy though, at least I can run the old WinAmp once
again.  My setup, for reference, is now:

AMD K7 7000 MHz @770MHz  (103/34 + 7)
Abit KA7
192 MB PC100 SDRAM
Matrox Mil. G200 (AGP Slot)
Adaptec 2940UW (PCI 1 Slot)
SB Live! Value (PCI 2 Slot)
Empty (PCI 3 Slot)
D-Link 10/100 NIC (PCI 4 Slot)
Empty (PCI 5 Slot)
Empty (PCI 6 Slot)
USR 33.6 Fax Modem (ISA Slot)

-T

"sanson" <samseng@singnet.com.sg> wrote in message
news:8ehq2c$hiq$1@violet.singnet.com.sg...
> hullo...i am having the same problem with creative vibra sound card and
have
> emailed them (abit) the problem. They promised to look into the matter
> ...will post any replies in future....if they reply that is.
>
> sanson
>
> Troy Murray <troymurray@hotmail.com> wrote in message
> news:JMMO4.16759$I7.22987280@news-east.usenetserver.com...
> > I'm also having this same problem with my CL SB PCI 128 card locking up
my
> > system.  It will start to play about 8-12 seconds of sound and then hang
> > hard, I have to then power down to get it reset.
> >
> > I have the following configuration:
> > AMD K7 7000 MHz
> > Abit KA7
> > 192 MB PC100 SDRAM
> > Matrox Mil. G200 (AGP Slot)
> > Adaptec 2940UW (PCI 1 Slot)
> > SB PCI128 (PCI 2 Slot)
> > Empty (PCI 3 Slot)
> > D-Link 10/100 NIC (PCI 4 Slot)
> > Empty (PCI 5 Slot)
> > Empty (PCI 6 Slot)
> > USR 33.6 Fax Modem (ISA Slot)
> >
> > I've tried moving the SB PCI card from 2 --> 3 --> 5 --> 6 and still the
> > same results, starts to play the music and then just locks up.  I've
also
> > attempted to manually set the IRQ, which is a little confusion, but that
> > still didn't work.  I've read of others that just simply replaced this
> card
> > since they had so much trouble with it and used a CL SB Live! which did
> away
> > with the problem.
> >
> > Any suggestions?
> >
> > -Troy Murray
> > "Drog" <me@your.net> wrote in message
> > news:v7mjgss2m068mo2vdkltchuerltb627omr@4ax.com...
> > > On Thu, 27 Apr 2000 14:00:08 -0500, "dan" <danc@tftcomputers.com>
> > > wrote:
> > >
> > > >Every friggin time I put my Creative Labs SoundBlaster PCI 128 into
my
> > > >machine the thing locks up.  As soon as it boots into windows I get a
> > lock
> > > >up or if IT doesn't lock up when I go to install the drivers (just
> > drivers
> > > >no added software, It reboots the machine at about 80% of its install
> > > >process. I have tried a clean O.S. install (same thing), I have tried
> > two
> > > >different SB PCI 128 Cards (same thing), I have tried with a new O.S.
> and
> > no
> > > >other cards (except video) SAME THING.  Anyone else?  My system
> > components
> > > >are...
> > > >
> > > >*Creative Labs Annihilator Geforce265
> > > >*Abit KA7
> > > >*(2) 128MB Micron Dimms PC-133
> > > >*AMD Athlon 700Mhz
> > > >*IBM 20.0GB 7200RPM
> > > >
> > > >
> > > >Any help would be greatly appreciated.
> > > >
> > > You may try setting IRQ 5 as reserved for legacy device in BIOS
> > > then the legacy driver for DOS won't try to take it from ACPI
> > > resulting in a lock up
> > >
> > > Worked for me....
> > >
> > > Gored
> > > www.bod-mod.com
> >
> >
>
>