🚀 go-pugleaf

hullo...i am having the same problem with creative vibra sound card and have
emailed them (abit) the problem. They promised to look into the matter
...will post any replies in future....if they reply that is.

sanson

Troy Murray <troymurray@hotmail.com> wrote in message
news:JMMO4.16759$I7.22987280@news-east.usenetserver.com...
> I'm also having this same problem with my CL SB PCI 128 card locking up my
> system.  It will start to play about 8-12 seconds of sound and then hang
> hard, I have to then power down to get it reset.
>
> I have the following configuration:
> AMD K7 7000 MHz
> Abit KA7
> 192 MB PC100 SDRAM
> Matrox Mil. G200 (AGP Slot)
> Adaptec 2940UW (PCI 1 Slot)
> SB PCI128 (PCI 2 Slot)
> Empty (PCI 3 Slot)
> D-Link 10/100 NIC (PCI 4 Slot)
> Empty (PCI 5 Slot)
> Empty (PCI 6 Slot)
> USR 33.6 Fax Modem (ISA Slot)
>
> I've tried moving the SB PCI card from 2 --> 3 --> 5 --> 6 and still the
> same results, starts to play the music and then just locks up.  I've also
> attempted to manually set the IRQ, which is a little confusion, but that
> still didn't work.  I've read of others that just simply replaced this
card
> since they had so much trouble with it and used a CL SB Live! which did
away
> with the problem.
>
> Any suggestions?
>
> -Troy Murray
> "Drog" <me@your.net> wrote in message
> news:v7mjgss2m068mo2vdkltchuerltb627omr@4ax.com...
> > On Thu, 27 Apr 2000 14:00:08 -0500, "dan" <danc@tftcomputers.com>
> > wrote:
> >
> > >Every friggin time I put my Creative Labs SoundBlaster PCI 128 into my
> > >machine the thing locks up.  As soon as it boots into windows I get a
> lock
> > >up or if IT doesn't lock up when I go to install the drivers (just
> drivers
> > >no added software, It reboots the machine at about 80% of its install
> > >process. I have tried a clean O.S. install (same thing), I have tried
> two
> > >different SB PCI 128 Cards (same thing), I have tried with a new O.S.
and
> no
> > >other cards (except video) SAME THING.  Anyone else?  My system
> components
> > >are...
> > >
> > >*Creative Labs Annihilator Geforce265
> > >*Abit KA7
> > >*(2) 128MB Micron Dimms PC-133
> > >*AMD Athlon 700Mhz
> > >*IBM 20.0GB 7200RPM
> > >
> > >
> > >Any help would be greatly appreciated.
> > >
> > You may try setting IRQ 5 as reserved for legacy device in BIOS
> > then the legacy driver for DOS won't try to take it from ACPI
> > resulting in a lock up
> >
> > Worked for me....
> >
> > Gored
> > www.bod-mod.com
>
>