🚀 go-pugleaf

Does anyone know if the Creative SB 1024 causes the same problems?

Dave.

"Troy Murray" <troymurray@hotmail.com> wrote in message
news:JMMO4.16759$I7.22987280@news-east.usenetserver.com...
> I'm also having this same problem with my CL SB PCI 128 card locking up my
> system.  It will start to play about 8-12 seconds of sound and then hang
> hard, I have to then power down to get it reset.
>
> I have the following configuration:
> AMD K7 7000 MHz
> Abit KA7
> 192 MB PC100 SDRAM
> Matrox Mil. G200 (AGP Slot)
> Adaptec 2940UW (PCI 1 Slot)
> SB PCI128 (PCI 2 Slot)
> Empty (PCI 3 Slot)
> D-Link 10/100 NIC (PCI 4 Slot)
> Empty (PCI 5 Slot)
> Empty (PCI 6 Slot)
> USR 33.6 Fax Modem (ISA Slot)
>
> I've tried moving the SB PCI card from 2 --> 3 --> 5 --> 6 and still the
> same results, starts to play the music and then just locks up.  I've also
> attempted to manually set the IRQ, which is a little confusion, but that
> still didn't work.  I've read of others that just simply replaced this
card
> since they had so much trouble with it and used a CL SB Live! which did
away
> with the problem.
>
> Any suggestions?
>
> -Troy Murray
> "Drog" <me@your.net> wrote in message
> news:v7mjgss2m068mo2vdkltchuerltb627omr@4ax.com...
> > On Thu, 27 Apr 2000 14:00:08 -0500, "dan" <danc@tftcomputers.com>
> > wrote:
> >
> > >Every friggin time I put my Creative Labs SoundBlaster PCI 128 into my
> > >machine the thing locks up.  As soon as it boots into windows I get a
> lock
> > >up or if IT doesn't lock up when I go to install the drivers (just
> drivers
> > >no added software, It reboots the machine at about 80% of its install
> > >process. I have tried a clean O.S. install (same thing), I have tried
> two
> > >different SB PCI 128 Cards (same thing), I have tried with a new O.S.
and
> no
> > >other cards (except video) SAME THING.  Anyone else?  My system
> components
> > >are...
> > >
> > >*Creative Labs Annihilator Geforce265
> > >*Abit KA7
> > >*(2) 128MB Micron Dimms PC-133
> > >*AMD Athlon 700Mhz
> > >*IBM 20.0GB 7200RPM
> > >
> > >
> > >Any help would be greatly appreciated.
> > >
> > You may try setting IRQ 5 as reserved for legacy device in BIOS
> > then the legacy driver for DOS won't try to take it from ACPI
> > resulting in a lock up
> >
> > Worked for me....
> >
> > Gored
> > www.bod-mod.com
>
>