🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: alt.comp.hardware
Article #1842

Re: SIIG I/O Professional board - jumper settings help?

#1842
From: cambrons
Date: Tue, 14 Jul 1998 00:00
28 lines
2236 bytes
In article <35827e12.28480806@news.isomedia.com>, Oof@Da.com says...
>
>Just bought this board, but it came without a manual.
>
>It has a DB-25 F parallel port and a DB-9 M serial port on the card.
>It has a 10-pin jumper and flat ribbon cable to a second blank card
>end, with a DB-25 M serial port.

< text cut >

>Thanks for any ideas.  Please reply to the newsgroup.

Just found the BOOK for my I/O Profesasional...
16550 Serial Port (x2) and IEEE 1284 (EPP/ECP) Parallel Port (x1)

The SIIG Bulletin Board System (BBS) number is 510-353-7532
The SIIG Tech Support Number is 510-657-8688  ext.339
E-Mail is 'siig@aol.com
FAX 510-657-5962
hope this helps


*********************************************
*      Sam Cambron, cambrons@swbell.net     *
*          Del City, Oklahoms, USA          *
* If you stand in the road for a long time, *
*           you WILL get run-over           *
*********************************************
Technical Details
Message-ID: <6oejrs$bsb$1@nnrp3>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <35827e12.28480806@news.isomedia.com>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: ffec8,1dcdf9a79728fa88
X-Google-Attributes: gidffec8,public
X-Google-Thread: f8e37,1dcdf9a79728fa88
X-Google-Attributes: gidf8e37,public
X-Google-Thread: 105ed0,1dcdf9a79728fa88
X-Google-Attributes: gid105ed0,public
X-Google-Thread: f5f89,1dcdf9a79728fa88
X-Google-Attributes: gidf5f89,public
X-Google-Thread: 1132d6,1dcdf9a79728fa88
X-Google-Attributes: gid1132d6,public
X-Google-Thread: 106c00,1dcdf9a79728fa88
X-Google-Attributes: gid106c00,public
X-Google-Thread: 112149,1dcdf9a79728fa88
X-Google-Attributes: gid112149,public
X-Google-Thread: 10265e,1dcdf9a79728fa88
X-Google-Attributes: gid10265e,public
From: cambrons*@swbell.net (cambrons)
Subject: Re: SIIG I/O Professional board - jumper settings help?
Date: 1998/07/14
Message-ID: <6oejrs$bsb$1@nnrp3>
X-Deja-AN: 371217458
References: <35827e12.28480806@news.isomedia.com>
Content-Type: Text/Plain; charset=US-ASCII
X-Complaints-To: usenet@nnrp3
X-Trace: nnrp3 900387516 12171 (None) 207.193.35.168
Organization: My House
Mime-Version: 1.0
Newsgroups: alt.comp.hardware,biz.comp.hardware,comp.hardware,comp.ibm.pc.hardware,comp.sys.ibm.hardware,comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.hardware.comm,comp.sys.ibm.pc-hardware