🚀 go-pugleaf

I've got an ATX case made by Min Maw Corporation. I really like it. It cost $88 
at a computer show and has a removable left side panel/door and easy slide-in 
rails and brackets for drives. It has 3 5 1/4" and two 3 /12" external bays. The 
Intel MARL motherboard fit in precicely. They have a web site and office in 
Industry, CA.

cdr

In article <01bd2cea$a24bfbe0$228653d1@us61656250>, "Randy & Debbie Skaggs" 
<rdskaggs@tseinc.com> wrote:
>I'm going to build a P-II system and it looks like most P-II boards are
>ATX.  I'm looking for a case with the following characteristics:
>
>1. Mid, Medium, or Full (no mini's) Tower for ATX motherboard
>2. 250W or more power supply
>3. Soft switch so system will power itself off when shutting down win95
>4. Removable motherboard chassis with framework for expansion cards (like
>In-Win)
>5. Removable brackets for mounting internal hard drives (like Enlight)
>6. Rails to mount on internal CDROM drive (or other peripheral with
>external face) so it can be slid into bay
>
>Many people swear by In-Win, and I have used Enlight.  I've also seen
>Karrie on the net, but they seem expensive (over $150).  Also most people
>don't address the soft switch.
>
>I would appreciate comments and leads to brands and especially dealers.
>
>Thanks,
>Randy
>rdskaggs@tseinc.com