🚀 go-pugleaf

steve wrote in message <37CFF669.45A@cableinet.co.uk>...
>Hi,
>
>> "An exception 0E has occured at 0028:C000AB12 in VxD VMM (D1) + 00009B12.
>> This was called from 0028:C1414240 in VxD ---. It may be possible to
>> continue normally."
>
>Sounds like an onboard cache problem.
>

There is no onboard cache.......P2 and P3 architecture has the cache on the
CPU

>>
>> Well, it didn't. Windows then said "Windows Protection error. You need to
>> restart your computer".
>
>You love it.
>
>>
>> Now, when I put my old P2 back in, it worked fine. So, my question is
this-
>> do I need special speed memory to use with a P3/ 440BX motherboard? I
know
>> there are 100MHz speed DIMMS out there, but I am not entirely sure that I
>> have them in my system?
>
>Unlikly.  The problem is more likly to be due to the architecture of the
>P3.  I would makesure your m/b can handle a P3.  Then find teh jumper
>switch to tell it that its a P3 (all this info should be in your manual)
>
>

No, you probably just need to upgrade your BIOS

>Or if you cant do this then try to disable the onboard cache for the
>motherboard.
>
>

Once again, see above......there is no cache on the MB

>Hope This Helps
>
>Steve