🚀 go-pugleaf

I have been using CF modules for a while, and I interfaced to these using
the TrueIDE mode. The benefit of this (from an electronic design point of
view) is that it involves less elctrical connections. The downside is that
this mode is not the default for the module. If you want to set TrueIDE,
then you have to power cycle the module with one of the signal pins tied
low.

Are you thinking of designing this into some custom hardware or was it just
for curiosity?

Paul Guyot <pguyot@pnm-consulting.com> wrote in message
news:pguyot-2E4F1B.17104806092000@news.free.fr...
> In article (Dans l'article) <8p5hgd$etq143@imsp212.netvigator.com>, "bond"
> <cwp48@hongkong.com> wrote (�crivait) :
>
> >I have some questions about Compactflash memory.
> >I have learn that CF memory have 2 kind of operation:
> >PC Card mode and TrueIDE mode.
> >
> >How can I config the CF memory to TrueIDE mode ?
>
> Everything is explained in the documentation.
> http://www.compactflash.org/cfspc1_4.pdf
>
> In a nutshell, the True IDE mode is configured using some hardware pins,
it
> is not one of the PCMCIA mode.
>
> Regards,
>
> Paul
>
> --
> P&M Consulting Newton Program
> http://www.pnm-consulting.com/newton/