🚀 go-pugleaf

Thanks.
Is it mean I need to set the jumper of my "compactflash reader", in order to
change to "IDE mode"

thanks again.



Graeme Parker <graemep@sundance.com> wrote in message
news:8p7l65$8nf$1@supernews.com...
> I have been using CF modules for a while, and I interfaced to these using
> the TrueIDE mode. The benefit of this (from an electronic design point of
> view) is that it involves less elctrical connections. The downside is that
> this mode is not the default for the module. If you want to set TrueIDE,
> then you have to power cycle the module with one of the signal pins tied
> low.
>
> Are you thinking of designing this into some custom hardware or was it
just
> for curiosity?
>
> Paul Guyot <pguyot@pnm-consulting.com> wrote in message
> news:pguyot-2E4F1B.17104806092000@news.free.fr...
> > In article (Dans l'article) <8p5hgd$etq143@imsp212.netvigator.com>,
"bond"
> > <cwp48@hongkong.com> wrote (�crivait) :
> >
> > >I have some questions about Compactflash memory.
> > >I have learn that CF memory have 2 kind of operation:
> > >PC Card mode and TrueIDE mode.
> > >
> > >How can I config the CF memory to TrueIDE mode ?
> >
> > Everything is explained in the documentation.
> > http://www.compactflash.org/cfspc1_4.pdf
> >
> > In a nutshell, the True IDE mode is configured using some hardware pins,
> it
> > is not one of the PCMCIA mode.
> >
> > Regards,
> >
> > Paul
> >
> > --
> > P&M Consulting Newton Program
> > http://www.pnm-consulting.com/newton/
>
>