🚀 go-pugleaf

The only jumpers on the board referring to ram is whether or not to
map the ram as auto-config or as extended.  When in either position it
does the same thing, the factory ram disappears and the new chips do
not show either.  There are several 'reserved' jumpers but with no
explanation in the manual.

Paul Wight

> Paul Wight wrote:
> 
> > I have a GVP 030 GForce Accelerator on my A2000 (standard setup-1MB
> > Chip, 2MB Fast) and I just got some used 64PIN 4MB SIMMS for it. 
> > Whnever I put ram on the card in any increments (1, 2, or 3 chips) I
> > lose the factory soldered RAM.  That is, the system does not recognize
> > it anymore.  This is evident from a cli when using avail command, from
> > sysinfo and from directory opus.  When I remove the ram, the factory
> > ram reappears.  Are there settings I am forgetting about when loading
> > this ram onto my accelerator?  If anyone has experienced this problem
> > and has a solution that would be very helpful.
>  
> Jumpers?
> -- 
> --
> 
> My domain contains .co, not .com as appears in the header.
> �
> ,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,�
> 
>    Patrick Ford   Auckland, Aotearoa (New Zealand)                      
> 
> Harvesters, send spam directly to:
> root@127.0.0.1,abuse@!--#echo var,postmaster@nsa.gov
> postmaster@localhost,abuse@localhost,root@mailloop.com
> cat/dev/zero/tmp/...`@localhost,halt@localhost.C:\con\con@localhost
> news.admin.net-abuse.email@myriad.alias.net,spamcop@spamcop.net
>