🚀 go-pugleaf

Paul,

You can get info on jumpers at: http://hard-ware.de/amiga

Mark

Paul Wight wrote:
> 
> The only jumpers on the board referring to ram is whether or not to
> map the ram as auto-config or as extended.  When in either position it
> does the same thing, the factory ram disappears and the new chips do
> not show either.  There are several 'reserved' jumpers but with no
> explanation in the manual.
> 
> Paul Wight
> 
> > Paul Wight wrote:
> >
> > > I have a GVP 030 GForce Accelerator on my A2000 (standard setup-1MB
> > > Chip, 2MB Fast) and I just got some used 64PIN 4MB SIMMS for it.
> > > Whnever I put ram on the card in any increments (1, 2, or 3 chips) I
> > > lose the factory soldered RAM.  That is, the system does not recognize
> > > it anymore.  This is evident from a cli when using avail command, from
> > > sysinfo and from directory opus.  When I remove the ram, the factory
> > > ram reappears.  Are there settings I am forgetting about when loading
> > > this ram onto my accelerator?  If anyone has experienced this problem
> > > and has a solution that would be very helpful.
> >
> > Jumpers?
> > --
> > --
> >
> > My domain contains .co, not .com as appears in the header.
> > �
> > ,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,��,+���+,�
> >
> >    Patrick Ford   Auckland, Aotearoa (New Zealand)
> >
> > Harvesters, send spam directly to:
> > root@127.0.0.1,abuse@!--#echo var,postmaster@nsa.gov
> > postmaster@localhost,abuse@localhost,root@mailloop.com
> > cat/dev/zero/tmp/...`@localhost,halt@localhost.C:\con\con@localhost
> > news.admin.net-abuse.email@myriad.alias.net,spamcop@spamcop.net
> >