🚀 go-pugleaf

On Tue, 02 Jul 2002 06:03:06 GMT, "BPC" <theconsumer@comcast.net>
wrote:

>When I attempted to add protocols Netbeiu was not available. After browsing
>the Linksys installation disk in the "Not Supported" folder, I found a
>manual and some references to a WPconfig program that will possibly install
>their Netbeiu protocol. I haven't tried this yet as it is 2AM where I am and
>I should be sleeping, but I'm so glad to finally get some intelligent
>information.
>
>BPC

If you could tell me what version of windows you are running I or
someone can tell you where it is.

In Win98 open your network setting, add protocol, or add, choose
protocol, then Microsoft, then choose NetBeui.

It will be under the control panel, or the shortcut would be to do a
right click on the network neighbohood/places, then choose properties
and you will see your network setup.

Hope this helps.
>
>"Iceman" <c0ld0n3@yahoo.com> wrote in message
>news:tdd2iu0217rgi6du05thmu4tpe2n6k1htk@4ax.com...
>> On Tue, 02 Jul 2002 05:07:27 GMT, "BPC" <theconsumer@comcast.net>
>> wrote:
>>
>> >After spending the majority of my evening on the phone with incompetent
>> >Linksys support, the last one told me I need to find "netbeiu" (his
>> >spelling) and learn how to install it. He says I need this to make the
>> >Linksys wireless print server work with their wireless router. He says
>once
>> >I install this magical file everything will work perfectly.
>> >
>> >Here's the problem: He could not tell me what the file is, where to find
>it
>> >or how to install it. He just mentioned this file then told me he
>couldn't
>> >stay on the phone with me any longer! He was the 3rd Linksys support
>person
>> >to mention this file and offer no suggestions on how to find it. I'm
>fairly
>> >computer savvy, (I set up the rest of the wireless network) so could
>someone
>> >point me in the direction of this magical end-all file to solve my
>wireless
>> >print server issue?
>> >
>> >Thanks in advance. It's good to know there is someone out there who is
>> >willing (and unlike Linksys support, able) to help!
>> >
>> >BPC
>> >
>>
>> You didn't mention the OS, so here is a shot.
>>
>> Go to your network setup/properties, add protocol netbeui, click ok,
>> it should rebind and ask you to reboot.
>