🚀 go-pugleaf

On Tue, 02 Jul 2002 05:59:23 GMT, "BPC" <theconsumer@comcast.net>
wrote:

>Thanks for all the quick responses!
>
>WinXP is my operating system.

OK, I will have to wait till tomorrow to do XP, but if you go to
start/help and do a search for Netbeui it should show you how to set
it up. But it is under the network properties in the control panel,
and you should be in administrator mode.

There in your network properties you should see an "install" click
then choose "protocol" then select "netbeui".

THis is the way under W2k and XP should be similar. either way the
windows help file should show you.


>
>"Iceman" <c0ld0n3@yahoo.com> wrote in message
>news:47f2iugq33jsp6b4vllsfejr8ffhdf14lo@4ax.com...
>> On Tue, 02 Jul 2002 05:30:53 GMT, "Berk S. Daemon"
>> <someone@somewhere.com> wrote:
>>
>> >
>> >"BPC" <theconsumer@comcast.net> wrote in message
>> >news:jyaU8.565721$Oa1.36076408@bin8.nnrp.aus1.giganews.com...
>> >> After spending the majority of my evening on the phone with incompetent
>> >> Linksys support, the last one told me I need to find "netbeiu" (his
>> >> spelling) and learn how to install it. He says I need this to make the
>> >> Linksys wireless print server work with their wireless router. He says
>> >once
>> >> I install this magical file everything will work perfectly.
>> >>
>> >> Here's the problem: He could not tell me what the file is, where to
>find
>> >it
>> >> or how to install it. He just mentioned this file then told me he
>couldn't
>> >> stay on the phone with me any longer! He was the 3rd Linksys support
>> >person
>> >> to mention this file and offer no suggestions on how to find it. I'm
>> >fairly
>> >> computer savvy, (I set up the rest of the wireless network) so could
>> >someone
>> >> point me in the direction of this magical end-all file to solve my
>> >wireless
>> >> print server issue?
>> >>
>> >> Thanks in advance. It's good to know there is someone out there who is
>> >> willing (and unlike Linksys support, able) to help!
>> >>
>> >> BPC
>> >
>> >If they're product(s) require NetBEUI or any form of NetBIOS, then if I
>were
>> >you I would immediatly return the product with some ass wipe in the box
>to
>> >the manufacturer and tell them that's what you think of it!
>> >
>>
>> You need a form of NetBios on any windows network in order to
>> communicate with other devices and or computers. Your firewall should
>> block it from getting out on to the NET.
>>
>> NetBeui is faster than TCP/IP and is a simplified way of communicating
>> on a local lan for small workgroups, it is brainless, no config needed
>> and will not run on the internet. (to keep your internet running fast
>> on a dial up make sure that netbeui and ipx/ is not enabled for the
>> modem connection)
>>
>> If you do not like either of these protocols the I suggest you run a
>> *nix box and stay away from Samba
>