🚀 go-pugleaf

XFree86 Version 3.3.5 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 23 1999
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
      ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
      ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
      wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
      sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
      sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090,
      NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535,
      ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555,
      ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200,
      p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Auto, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Tseng Labs Inc|ET6000"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: Tseng Labs ET6000/6100 rev 112, Memory @ 0xe4000000, I/O @
0xe000
(--) SVGA: ET6100: Using built-in programmable Clock Chip/RAMDAC (ID=0x96)
(--) SVGA: ET6100: Detected 2304 kb of multi-bank DRAM
(--) SVGA: Ramdac: et6000
(--) SVGA: ET6100: MClk: 97.16 MHz, R/C: 0x14
(--) SVGA: chipset:  ET6100
(--) SVGA: videoram: 2304k
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 70.000 MHz
(**) SVGA: Mode "800x600": mode clock =  36.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: ET6100: Using linear framebuffer at 0xE4000000.
(--) SVGA: Using 7kb of unused display memory for extra acceleration
functions.
(--) SVGA: XAA/Tseng: Using ET6000-specific Color-expansion (WriteBitmap,
FillRect(Opaque)Stippled).
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (bitmap, stipple,
imagetext, polytext)
(--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: General lines and segments
Mouse: PnP ID string: '(!DPNP0F0A\00050101\MOUSE\PNP0F0A\MICROSOFT SERIAL
MOUSE 2.1A51)'
Mouse: PnP rev 1.00
Mouse: protocol: 0
_FontTransSocketUNIXConnect: Can't connect: errno = 111
failed to set default font path 'unix/:-1'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X connection to :0.0 broken (explicit kill or server shutdown).


Can anyone help please