🚀 go-pugleaf

I'ts alittle criptic, but I think the problem is in your default path...
try and find a document on XF86Config.

Muhaimin Shah schreef:

> XFree86 Version 3.3.5 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: August 23 1999
>  If the server is older than 6-12 months, or if your card is newer
>  than the above date, look for a newer version before reporting
>  problems.  (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.5-22smp i686 [ELF]
> Configured drivers:
>   SVGA: server for SVGA graphics adaptors (Patchlevel 0):
>       NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
>       RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
>       ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
>       ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
>       ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
>       wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
>       sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
>       sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
>       tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
>       tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
>       tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
>       cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
>       blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
>       clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
>       clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
>       clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
>       cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
>       mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
>       ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
>       video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
>       s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090,
>       NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535,
>       ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555,
>       ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200,
>       p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keycodes: "xfree86"
> (**) XKB: types: "default"
> (**) XKB: compat: "default"
> (**) XKB: symbols: "us(pc101)"
> (**) XKB: geometry: "pc"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "us"
> (**) Mouse: type: Auto, device: /dev/mouse, baudrate: 1200
> (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
> (**) SVGA: Graphics device ID: "Tseng Labs Inc|ET6000"
> (**) SVGA: Monitor ID: "My Monitor"
> (--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
> (--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
> (--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
> (--) SVGA: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
> (--) SVGA: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
> (--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
> (--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> (--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
> (--) SVGA: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
> (--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
> (--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
> (--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
> (--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
> (--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
> (--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
> (**) FontPath set to "unix/:-1"
> (--) SVGA: PCI: Tseng Labs ET6000/6100 rev 112, Memory @ 0xe4000000, I/O @
> 0xe000
> (--) SVGA: ET6100: Using built-in programmable Clock Chip/RAMDAC (ID=0x96)
> (--) SVGA: ET6100: Detected 2304 kb of multi-bank DRAM
> (--) SVGA: Ramdac: et6000
> (--) SVGA: ET6100: MClk: 97.16 MHz, R/C: 0x14
> (--) SVGA: chipset:  ET6100
> (--) SVGA: videoram: 2304k
> (**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
> (--) SVGA: Maximum allowed dot-clock: 70.000 MHz
> (**) SVGA: Mode "800x600": mode clock =  36.000
> (--) SVGA: Virtual resolution set to 800x600
> (--) SVGA: SpeedUp code selection modified because virtualX != 1024
> (--) SVGA: ET6100: Using linear framebuffer at 0xE4000000.
> (--) SVGA: Using 7kb of unused display memory for extra acceleration
> functions.
> (--) SVGA: XAA/Tseng: Using ET6000-specific Color-expansion (WriteBitmap,
> FillRect(Opaque)Stippled).
> (--) SVGA: Using XAA (XFree86 Acceleration Architecture)
> (--) SVGA: XAA: Solid filled rectangles
> (--) SVGA: XAA: Screen-to-screen copy
> (--) SVGA: XAA: 8x8 pattern fill
> (--) SVGA: XAA: Indirect CPU to screen color expansion (bitmap, stipple,
> imagetext, polytext)
> (--) SVGA: XAA: Using 6 128x128 areas for pixmap caching
> (--) SVGA: XAA: Caching tiles and non-transparent stipples
> (--) SVGA: XAA: General lines and segments
> Mouse: PnP ID string: '(!DPNP0F0A\00050101\MOUSE\PNP0F0A\MICROSOFT SERIAL
> MOUSE 2.1A51)'
> Mouse: PnP rev 1.00
> Mouse: protocol: 0
> _FontTransSocketUNIXConnect: Can't connect: errno = 111
> failed to set default font path 'unix/:-1'
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> X connection to :0.0 broken (explicit kill or server shutdown).
>
> Can anyone help please

--
You had mail from Tijmen Stam

Mail me back at Tijmens@geocities.com

(reply can take a couple of weeks)

*********************************************************************

I use   /-\      /-\ /--\   /-\ /-\   /-\ |-\  /-| By Thorevaelds...
        | |      | | |   \  | | | |   | |  \ \/ /
        | |      | | | |\ \ | | | |   | |   \  /
        | |      | | | | \ \| | | |   | |   /  \
        | \----\ | | | |  \   | \ \---/ /  / /\ \
Yeah... \------/ \-/ \-/   \--/  \-----/  |-/  \-|