🚀 go-pugleaf

Ok, I've tried the standard driver that comes with Mandrake 9 with no
success. Now I've downloaded speedtouch-1.1.tar.gz from sourceforge and can
sort of make it work with:

modprobe ppp_generic
modprobe ppp_synctty
modprobe n_hdlc
modem_run -v 2 -m -f /usr/share/speedtouch/mgmt.o

When it tries to load the microcode into the modem it gets about half of the
first block done and then gets a timeout error. So I just run the modem_run
command again and on the 2nd attempt it works. I then run "pppd call adsl"
which works fine. (I've updated the vci/vpi in /etc/ppp/adsl). ifconfig
gives:

ppp0      Link encap:Point-to-Point Protocol
          inet addr:203.217.2.3  P-t-P:203.166.38.115  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1520  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:452 (452.0 b)  TX bytes:64 (64.0 b)


Then I try and ping something (dns server on iinet.net.au)

[root@server zifnab]# ping 203.0.178.191
PING 203.0.178.191 (203.0.178.191) from 192.168.0.1 : 56(84) bytes of data.
From 192.168.0.1 icmp_seq=1 Destination Host Unreachable
From 192.168.0.1 icmp_seq=2 Destination Host Unreachable
From 192.168.0.1 icmp_seq=3 Destination Host Unreachable

and it tries to run via the LAN. Also there is no dns.

Any thoughts??