USB mouse not recognised by latest kernel + Slack7

Thread View: alt.os.linux.slackware

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Gavin Cato Sat, 22 Apr 2000 00:00

#123

Author: Gavin Cato
Date: Sat, 22 Apr 2000 00:00

67 lines
3028 bytes

Hiya,

As the subject line says my USB mouse isn't getting any joy.

Logitech USB mouse.
Kernel 2.2.99-pre5
Abit BP6 motherboard with 2 x 366mhz celeron's

This is the output from "dmesg" with the relevant section about the mouse.
(So I guess it technically does pick it up)

After boot, there is no /dev/usb section and /proc/usb is a empty directory
; I'm guessing because of the "not recognized" line.

It says pretty much identically the same thing for my HP 5300C scanner. (but
I'll worry about that later).

Any ideas? I'm stuck in windows until I can get my mouse working for X :(

<!--StartFragment-->hub.c: portstatus 301, change 1, Low Speed
hub.c: portstatus 303, change 0, Low Speed
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF cbfd2540, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Logitech
Product: N48
usb.c: unhandled interfaces on device
usb.c: This device is not recognized by any installed USB driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.00
  Vendor:Product      = 046d:c001
  MaxPacketSize0      = 8
  NumConfigurations   = 1
  Device version      = 4.01
  Device Class:SubClass:Protocol = 00:00:00
    Per-interface classes
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 0022
  bNumInterfaces      =   01
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   a0
  MaxPower            =   26mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   01
    bInterface Class:SubClass:Protocol =   03:01:02
    iInterface          =   00
    Endpoint:
      bLength             =    7
      bDescriptorType     =   05
      bEndpointAddress    =   81 (in)
      bmAttributes        =   03 (Interrupt)
      wMaxPacketSize      = 0008
      bInterval           =   0a
hub.c: port 2 connection change
hub.c: portstatus 101, change 1, High Speed

Re: USB mouse not recognised by latest kernel + Slack7

#124

Author: Alexandre Gilardoni
Date: Sat, 22 Apr 2000 00:00

28 lines
1652 bytes

"Gavin Cato" <gavin@optus.net.au> writes:

> As the subject line says my USB mouse isn't getting any joy.
 
My Intellieye works very well with a 2.2.14 kernel after applying
usb-2.3.50-1-for-2.2.14.diff patch, recompiling with :
CONFIG_USB=m
CONFIG_USB_UHCI=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_HID=m
CONFIG_INPUT_MOUSEDEV=m
creating /dev/hidmouse with :
mknod /dev/hidmouse c 10 32
adding this lines in /etc/rc.d/rc.modules :
/sbin/modprobe usb-uhci
/sbin/modprobe hid
/sbin/modprobe mousedev
and linking /dev/mouse with /dev/hidmouse
with that in XF86Config :
Section "Pointer"
   Protocol        "IMPS/2"
   Device          "/dev/mouse"
   Resolution      100
   ZAxisMapping    4 5
EndSection
-- 
alexandre.gilardoni@wanadoo.fr
 "Aide-toi et Linux t'aidera"

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads