🚀 go-pugleaf

 
 On Wed, 17 Oct 2001, "Hooda Gest" wrote about: 
 Re: No solution??? Re: Still none: Re: I lost my Dial-up sounds 


>
>After reading this, I find I don't quite grasp the problem...

No modem sound, no beep beep buzz ka-chang sounds when
connecting.  All other sounds (except "drums") seem ok.

>Volume and sound control for a modem on a dialup is controlled through the
>DUN connection icon's properties. You access the modem configuration through
>that and change the sound. Changing sound under Control Panel/Modems will
>have no effect since the DUN settings will override it.
>
>Check your modem log to see what is being sent to the modem in regards to Mx
>and Lx.

Thanks Hooda!  I don't see any problems, do you? 

10-22-2001 11:03:32.69 - HSP56 MicroModem in use.
10-22-2001 11:03:32.70 - Modem type: HSP56 MicroModem
10-22-2001 11:03:32.70 - Modem inf path: PCTEL_~1.INF
10-22-2001 11:03:32.70 - Modem inf section: Modem4
10-22-2001 11:03:34.55 - 115200,N,8,1
10-22-2001 11:03:34.77 - 115200,N,8,1
10-22-2001 11:03:34.80 - Initializing modem.
10-22-2001 11:03:34.80 - Send: AT<cr>
10-22-2001 11:03:34.80 - Recv: AT<cr>
10-22-2001 11:03:34.81 - Recv: <cr><lf>OK<cr><lf>
10-22-2001 11:03:34.81 - Interpreted response: Ok
10-22-2001 11:03:34.81 - Send: AT&FE0&C1&D2&K3V1W3S0=0<cr>
10-22-2001 11:03:34.81 - Recv: AT&FE0&C1&D2&K3V1W3S0=0<cr>
10-22-2001 11:03:34.81 - Recv: <cr><lf>OK<cr><lf>
10-22-2001 11:03:34.81 - Interpreted response: Ok
10-22-2001 11:03:34.81 - Send: ATS7=60S30=0M1\N3%C3&K3B0N1X4<cr>
10-22-2001 11:03:34.82 - Recv: <cr><lf>OK<cr><lf>
10-22-2001 11:03:34.82 - Interpreted response: Ok
10-22-2001 11:03:34.82 - Send: At S11=55 M1 L3<cr>
10-22-2001 11:03:34.82 - Recv: <cr><lf>OK<cr><lf>
10-22-2001 11:03:34.82 - Interpreted response: Ok
10-22-2001 11:03:34.83 - Dialing.


The At S11=55 M1 L3 I added via the DUN icon.
At S11=55 has been there forever, and functions.  
The others I added after this problem.  Also,
the volume "slider switch" there is set to max. 

> Also, if this is a voice modem, check your cabling between sound
>card and modem.

My Celeron has no sound card, no modem card.
It seems to work ok, I commonly get 53333 connects. 
--Doug

>" Doug Bashford " <see.my.sig@theBeach.edu> wrote in message
>news:3bcdab05.7200360@news.psnw.com...
>>
>>  On Thu, 11 Oct 2001 19:07:54, (Carib) wrote about:
>>  Re: Still none: Re: I lost my Dial-up sounds
>> >On Tue, 09 Oct 2001 21:56:21 GMT, ( Doug Bashford ) wrote:
>> >>  On Wed, 3 Oct 2001, "Don Schmidt"  wrote:
>> >
>> >>>   M1       Speaker On until carrier received
>> >>>   M2       Speaker always On
>> >>>   M3       Speaker disabled while dialing and after carrier received
>>    (snip other modem AT sound settings)
>>
>> >>>" Doug Bashford " wrote in message
>> >>>> I have a celeron 400, 64, Win98SE.
>>
>> >>Sorry, It did not help.
>> >>Also, they workeked just fine before.
>>
>> >You have no problem because there is no solution.
>>
>> Oh brother.  I have no "drum" (Windows waiting?) sounds, either.
>> Is that a wav, or what?  All other sound and multimedia
>> ok. Win98SE.
>>
>> Did the below, no help.
>> Thanks!
>> --Doug
>>  In <soxu7.28009$SS.120985@news2.calgary.shaw.ca>
>>  On Wed, 03 Oct 2001 05:31:04, "neufie" wrote about:
>>  Re: I lost my Dial-up sounds
>> >Goto Start>Settings>Control Panel>Dbl-click modems>properties,
>> >and set speaker volume.
>> >" Doug Bashford " <see.my.sig@theBeach.edu> wrote in message
>> >news:3bb9d846.2287801@news.psnw.com...
>> >>
>> >> I have a celeron 400, 64, Win98SE.
>> >>
>> >> I lost my dial-up sounds, the phone dialing, etc

>> >> (I also notice that "beating drums" animated icon
>> >> makes no sound, I'm not sure it ever did.)  Midi's,
>> >> Wavs, and Mp3s all work in recently installed
>> >> WMPlayer 7.01, as does the Win boot intro WAV and
>> >> general Win sounds (I'm not sure what plays those).
>> >>
>> >> I recently removed a Zip drive GUEST line
>> >> that also contained ptsnoop from the registry
>> >> and also recently installed QuickTime.
>> >>
>> >> Any ideas?
>> >> --Doug