🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: aus.computers.linux
Article #59992

Re: ASUS SP3G and/or NCR 53c810 driver?

#59992
From: Stefan Froehlich
Date: Wed, 12 Apr 1995 00:00
72 lines
3040 bytes
In article <3ma9jo$p6g@muffin.pronet.com> cas@muffin.pronet.com (Craig Sanders) writes:
>From: cas@muffin.pronet.com (Craig Sanders)
>Subject: ASUS SP3G and/or NCR 53c810 driver?
>Date: 10 Apr 1995 13:44:56 +1000
>Summary: how well does it work with Linux?
>Keywords: SCSI


>I'm going to be getting myself a new motherboard soon for my machine
>here, and will also need to get two more complete Linux computers in the
>near future if some projects I am working on get to a suitable state.

>I'm seriously thinking of getting an ASUS SP3G motherboard - the built
>in SCSI, EIDE, and 72-pin SIMMS and everything else makes it sound
>ideal.  It also seems to be the most recommended board for Linux.

>However, I've also heard that the NCR 53c810 SCSI controller doesn't
>work 100% reliably at the moment.  That it is still very much an
>experimental driver.



>Does anyone have either an ASUS SP3G and use the built-in SCSI, or have
>another board with an NCR 53c810 SCSI controller card installed?

I have it, I use it and I am very happy with it. If I had to buy another PC, I 
would choose it again.

>How well does it work?  Is it reliable?

Never lost a bit within three months.

>What sort of conditions does it fail under?

xxxx

>Is swapping to a SCSI drive a problem?

No.

>Is swapping to SCSI a problem when another SCSI device (e.g. tape drive
>or cd-rom) is using the SCSI bus a problem?

Don't know. I only have one SCSI disk.

>If swapping is a problem, would the problems be insignificant if I used
>an EIDE or IDE drive for the boot, root, and swap partitions?

n.a.

>If I do buy one, is there anything I should watch out for.

watch out for the 'G' in the product number

>Any replies to these questions - or just comments about the ASUS SP3G and/or
>the NCR 53c810 SCSI controller - would be greatly appreciated.  I have to
>make a decision within the next week or so...

go out and bye it...

>Post and Email any replies and I'll post a summary back to the net.

>Craig

Hope I could help,

	Stefan

>-- 
> +----------------------------------------------------------------------------+
> |cas@muffin.pronet.com                                cas@muffin.apana.org.au|
> +----------------------------------------------------------------------------+
Technical Details
Message-ID: <e9025800.12.005D6DE8@stud1.tuwien.ac.at>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <3ma9jo$p6g@muffin.pronet.com>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 1103af,3c39796cdcc9532d
X-Google-Attributes: gid1103af,public
X-Google-Thread: 102983,3c39796cdcc9532d
X-Google-Attributes: gid102983,public
X-Google-Thread: 102b32,3c39796cdcc9532d
X-Google-Attributes: gid102b32,public
From: e9025800@stud1.tuwien.ac.at (Stefan Froehlich)
Subject: Re: ASUS SP3G and/or NCR 53c810 driver?
Date: 1995/04/12
Message-ID: <e9025800.12.005D6DE8@stud1.tuwien.ac.at>
X-Deja-AN: 100186921
references: <3ma9jo$p6g@muffin.pronet.com>
summary: how well does it work with Linux?
organization: TU-Wien, EDV-Zentrum
keywords: SCSI
newsgroups: aus.computers.linux,comp.os.linux.misc,comp.os.linux.hardware