Article View: aus.computers.linux
Article #60010Re: PCI-SC200 (ncr53c810) scsi problem
From: Stan Pennington
Date: Tue, 22 Nov 1994 00:06
Date: Tue, 22 Nov 1994 00:06
40 lines
2393 bytes
2393 bytes
Mr D. Suter (suter@fawlty8.eng.monash.edu.au) wrote: : I have had no luck getting the boot disk to recognise : my scsii disk (quantum empire 2Gb) on a PCI-sc200 card : with the ncr53c810 chip. : Other hardware: P90 : Diamond Viper (SE) PCI : Prime 2C MKIII Super IDE controler (simply controlling : the floppy - has jumper to disable the IDE) : Motherboard has "award bios" : Rins fine under DOS. : I have tried: : putting the board in various (of my 3) PCI slots. : setting the BIOS to map INTA on those slots to int 14 (both edge and level) : giving the parameters (ramdisk ncr53c810=0x6700,14) to LILO : tried some other IRQ (than 14) - although in less combinations with the above 3 : and at all times the *#$%$##@$%% message (after recognising the ncr53c810 : chip and printing the adress 0xf8007000, io 0x6700, irq 0) is : that IRQ0 is not free. : Am I doing something obviously wrong or should I return the SCSI card : and get another make? : Should I demand another motherboard? : Should I reread the howto for the 1000 time? : (thanks to one person how replied to a previous post that suggested : I try interrupt 14 setting int the bios - but, as you can see, it doesn't : seem to work for me). : Any suggestion is appreciated. : regards : d.s. : -- : David Suter - Dept. of Electrical and : Computer Systems Engineering, Monash University, : Clayton, Vic. 3168, Australia : ph 905 5682 Fax 905 3454
Technical Details
Message-ID:
<3arclu$9jt@news.u.washington.edu>Path:
arc1-ca.pugleaf.net!nntp.gmd.de!newsserver.jvnc.net!rutgers!sgigate.sgi.com!sgiblab!spool.mu.edu!news.clark.edu!netnews.nwnet.net!news.u.washington.edu!stanReferences:
<3ajb03$34b@harbinger.cc.monash.edu.au>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 102983,f88cbe79dedcd894 X-Google-Attributes: gid102983,public X-Google-Thread: 100b1f,f88cbe79dedcd894 X-Google-Attributes: gid100b1f,public X-Google-ArrivalTime: 1994-11-22 02:46:15 PST Path: arc1-ca.pugleaf.net!nntp.gmd.de!newsserver.jvnc.net!rutgers!sgigate.sgi.com!sgiblab!spool.mu.edu!news.clark.edu!netnews.nwnet.net!news.u.washington.edu!stan From: stan@icsl.ee.washinton.edu (Stan Pennington) Newsgroups: aus.computers.linux,comp.os.linux.help Subject: Re: PCI-SC200 (ncr53c810) scsi problem Followup-To: aus.computers.linux,comp.os.linux.help Date: 22 Nov 1994 00:06:22 GMT Organization: University of Washington Lines: 40 Message-ID: <3arclu$9jt@news.u.washington.edu> References: <3ajb03$34b@harbinger.cc.monash.edu.au> NNTP-Posting-Host: fizzle.ee.washington.edu X-Newsreader: TIN [version 1.2 PL2]