🚀 go-pugleaf

"Brooks N. Texas" wrote:

> I have bought a new system and wanted to network (file share only) with
> my old PC. I bought a NETGEAR home network system and cannot get it and
> get RoadRunner working properly at the same time (seems to be one or the
> other). Computer #2 (old one) shows both computers under Network
> Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> card and computer #2 has two, one linked to the hub the other to
> RoadRunner. If you KNOW how to straighten this out and get it working I
> would like an hour +/- of your time and will pay you. Please email me and
> tell me how much you want and when you are available, the sooner the
> better!
> Thanks,
>  BT

Lots of variables here, but I've found that most often, the pc that is not
showing is the problem.
Usually, there is a problem with the configuration of the PC that is not
showing.  Start off by swapping out the two network cards, and cables just to
prove that both work.  Then remove all aspects of your network definition,
and allow windows to find everything again.--Goto: Start:Control
Panel:Network
This is just a start point.  From there, double check all aspects of your
network config.

Are you using 98 or 2000?


Tracey

[This followup was posted to austin.general and a copy was sent to the 
cited author.]

In article <3A52C980.1D8F5C89@hotbot.com>, tracey12@hotbot.com says...
> 
> 
> "Brooks N. Texas" wrote:
> 
> > I have bought a new system and wanted to network (file share only) with
> > my old PC. I bought a NETGEAR home network system and cannot get it and
> > get RoadRunner working properly at the same time (seems to be one or the
> > other). Computer #2 (old one) shows both computers under Network
> > Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> > card and computer #2 has two, one linked to the hub the other to
> > RoadRunner. If you KNOW how to straighten this out and get it working I
> > would like an hour +/- of your time and will pay you. Please email me and
> > tell me how much you want and when you are available, the sooner the
> > better!
> > Thanks,
> >  BT
> 
> Lots of variables here, but I've found that most often, the pc that is not
> showing is the problem.
> Usually, there is a problem with the configuration of the PC that is not
> showing.  Start off by swapping out the two network cards, and cables just to
> prove that both work.  Then remove all aspects of your network definition,
> and allow windows to find everything again.--Goto: Start:Control
> Panel:Network
> This is just a start point.  From there, double check all aspects of your
> network config.
> 
> Are you using 98 or 2000?
> 
> 
> Tracey
> 
> 
Tracey,
 Using Win98, pulled and swapped cards, started over etc. no luck. I'm 
sure it's something obvious or I'm not holding my mouth right etc.....
Thanks,
 BT

"Brooks N. Texas" wrote:

> [This followup was posted to austin.general and a copy was sent to the
> cited author.]
>
> In article <3A52C980.1D8F5C89@hotbot.com>, tracey12@hotbot.com says...
> >
> >
> > "Brooks N. Texas" wrote:
> >
> > > I have bought a new system and wanted to network (file share only) with
> > > my old PC. I bought a NETGEAR home network system and cannot get it and
> > > get RoadRunner working properly at the same time (seems to be one or the
> > > other). Computer #2 (old one) shows both computers under Network
> > > Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> > > card and computer #2 has two, one linked to the hub the other to
> > > RoadRunner. If you KNOW how to straighten this out and get it working I
> > > would like an hour +/- of your time and will pay you. Please email me and
> > > tell me how much you want and when you are available, the sooner the
> > > better!
> > > Thanks,
> > >  BT
> >
> > Lots of variables here, but I've found that most often, the pc that is not
> > showing is the problem.
> > Usually, there is a problem with the configuration of the PC that is not
> > showing.  Start off by swapping out the two network cards, and cables just to
> > prove that both work.  Then remove all aspects of your network definition,
> > and allow windows to find everything again.--Goto: Start:Control
> > Panel:Network
> > This is just a start point.  From there, double check all aspects of your
> > network config.
> >
> > Are you using 98 or 2000?
> >
> >
> > Tracey
> >
> >
> Tracey,
>  Using Win98, pulled and swapped cards, started over etc. no luck. I'm
> sure it's something obvious or I'm not holding my mouth right etc.....
> Thanks,
>  BT

You verified though that both cards work on the good computer along with both
cables??  Or when you moved them, did the other computer not show up?

Sometimes, cables are not made properly, so you have to swap them out and the same
with cards.
This is the easiest thing to do.

Now, try this if you haven't already.  Verify that the settings on both machines
under the Network icon are exactly the same on both machines, and what I mean is to
click on each of the definitions and check all the little parameter settings for
the cards, etc.  Both computers should be exactly set the same way.

Next, whatever you do, don't use internet sharing at this point.

Let me know.


Tracey

Try the RR newsgroups; many people have gone before you on this problem.

"Brooks N. Texas" <brookstexas@yahoo.com> wrote in message
news:MPG.14bc435a544cf1c5989681@news-server.austin.rr.com...
> [This followup was posted to austin.general and a copy was sent to the
> cited author.]
>
> In article <3A52C980.1D8F5C89@hotbot.com>, tracey12@hotbot.com says...
> >
> >
> > "Brooks N. Texas" wrote:
> >
> > > I have bought a new system and wanted to network (file share only)
with
> > > my old PC. I bought a NETGEAR home network system and cannot get it
and
> > > get RoadRunner working properly at the same time (seems to be one or
the
> > > other). Computer #2 (old one) shows both computers under Network
> > > Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> > > card and computer #2 has two, one linked to the hub the other to
> > > RoadRunner. If you KNOW how to straighten this out and get it working
I
> > > would like an hour +/- of your time and will pay you. Please email me
and
> > > tell me how much you want and when you are available, the sooner the
> > > better!
> > > Thanks,
> > >  BT
> >
> > Lots of variables here, but I've found that most often, the pc that is
not
> > showing is the problem.
> > Usually, there is a problem with the configuration of the PC that is not
> > showing.  Start off by swapping out the two network cards, and cables
just to
> > prove that both work.  Then remove all aspects of your network
definition,
> > and allow windows to find everything again.--Goto: Start:Control
> > Panel:Network
> > This is just a start point.  From there, double check all aspects of
your
> > network config.
> >
> > Are you using 98 or 2000?
> >
> >
> > Tracey
> >
> >
> Tracey,
>  Using Win98, pulled and swapped cards, started over etc. no luck. I'm
> sure it's something obvious or I'm not holding my mouth right etc.....
> Thanks,
>  BT

Network Neighborhood is a spotty feature at best.... can you access PC2 from
PC1 by using Start/Run and typing \\<PC2ComputerName>\<Sharename>?

"Brooks N. Texas" <brookstexas@yahoo.com> wrote in message
news:MPG.14bbc860ba90ca3c989680@news-server.austin.rr.com...
> I have bought a new system and wanted to network (file share only) with
> my old PC. I bought a NETGEAR home network system and cannot get it and
> get RoadRunner working properly at the same time (seems to be one or the
> other). Computer #2 (old one) shows both computers under Network
> Neighborhood but the new PC (PC1) only shows itself. PC 2 has one NIC
> card and computer #2 has two, one linked to the hub the other to
> RoadRunner. If you KNOW how to straighten this out and get it working I
> would like an hour +/- of your time and will pay you. Please email me and
> tell me how much you want and when you are available, the sooner the
> better!
> Thanks,
>  BT