🚀 go-pugleaf

DreamChaser wrote:
>Bob Gonder wrote:
>> 	option[0].cbType = IP_OPT_EOL;
>> 
>should be:
>  	option[1].cbType = IP_OPT_EOL;
>
>Just looks wrong to me to be [0]. I'm just checking. Thanks again.

No wonder it "worked" but the output looked wrong.

	UCHAR	OptionSize = sizeof(RecordRouteOption);
	RecordRouteOption option[2] = {0};
	IP_OPTION_INFORMATION info = {0};

	DWORD	ReplySize = sizeof(ICMP_ECHO_REPLY) + sizeof(option) +
				sizeof(SendData) + 8;
	ICMP_ECHO_REPLY* reply = (PICMP_ECHO_REPLY) malloc(ReplySize);

	info.Ttl = 255;
	info.OptionsSize = OptionSize + 1; // IP_OPT_RR + IP_OPT_EOL
	info.OptionsData = (PUCHAR)&option[0];

	memset(option,0,sizeof(option) );
	option[0].cbType = IP_OPT_RR;
	option[0].cbSize = OptionSize;
	option[0].pointer = 4;
	//option[1].cbType = IP_OPT_EOL;
	info.OptionsData[ OptionSize ] = IP_OPT_EOL;

Option too large.
An invalid or inconsistent flowspec was found in the QOS structure.

That error is good down to...
	UCHAR	OptionSize = 3+(10*4);

Then at this, or lower....
	UCHAR	OptionSize = 3+(9*4);
Request timed out.
Error due to lack of resources.

Then at
	UCHAR	OptionSize = 3+(0*4); or 64*4 == same thing
Bad option.
There are no senders.

 - - -

Changing the IP to a local machine, and OptionSize = 3+(8*4),

Reply from 192.168.0.3: bytes=5, time=  0ms TTL=128
Data: Hello
InfoAddress:902BBC

TimeToLive:128
TypeOfService:0
Flags:0
OptionsSize:36
OptionsData:902BC4
Type:7
Size:35
Pointer:8
IP2=0
IP1=300A8C0

Increasing OptionSize on this "working" version, gives
Option too large.

Changing the IP on this "working" version to non-existant local ip:
Request timed out.
Error due to lack of resources.

 - - -
Conclusions:
1) Options maxes out at 9 IP_ADDR
2) It needs some way of getting to the requested IP.
3) Aborts on Vista.