🚀 go-pugleaf

In article <25546@amdcad.AMD.COM> tim@amd.com (Tim Olson) writes:
>
>The Am29000 calling convention says that global temporary registers are
>killed across a procedure call, while values in local registers remain
>alive. 

This certainly is a good way to do it.  Is the terminology you
use for local and global standard? (It is the opposite of what I have
usually heard before, and seems counterintuitive - it seems that the
temporaries should be local temporaries, although as you have used it
the registers are "global temporary registers" because they are assigned
to handle temporaries in all procedures- hence "global".)

>A static analysis of 495 functions shows that an average of 6.6 global
>registers and an average of 7.0 local registers are used per function,
:
>	 11:  2.83% (14)         11:  3.03% (15)
:

An interesting set of figures.  Using 32 general purpose registers, with
16 for local and 16 for temporaries, would certainly seem to fit, given where
the knee of the curve is.

Anyway, I wonder what the results look like for things like double
precision: Linpack, the Livermore Loops, the NAS kernels, etc.
(In other words, 64 bit floating point numeric codes...)  ...?



  Hugh LaMaster, m/s 233-9,  UUCP ames!lamaster
  NASA Ames Research Center  ARPA lamaster@ames.arc.nasa.gov
  Moffett Field, CA 94035     
  Phone:  (415)694-6117