Re: ISDN BRI B-Channel aggregation

Article View: comp.dcom.sys.cisco

Article #1932

Back to comp.dcom.sys.cisco Previous Next

#1932

From: Steven R. Pfister
Date: Wed, 20 Dec 1995 00:54

27 lines
1464 bytes

In article <4b2nfu$1d1@news.worldlinx.com>, Andre Tremblay wrote:

> In article <srp336-1212951858410001@spfister.optimum.com>, 
> srp336@optimum.com says...
> >I would like to get both channels connected at the same time so
> >I can take advantage of the full bandwidth of the line.
> >What methods of B-Channel aggregation are supported by this setup?
> >Is multilink PPP supported? How about BONDING? Are there others?
> 
> Multilink ppp is supporter in 11.0.3. (Very new and unstable).
> Bonding is not supported....
> 
> Bye
> Andre Tremblay
> Bell Advanced Communication
> atremblay@ceb.qc.ca

I am running IOS 10.3(6) at the central site. I am able to get
cisco 1003 and 1004 routers to dial in on two channels with
no problem. What aggregation method is being used there? Is it
something proprietary to cisco? Will BONDING ever be supported by 
cisco?  Is there anything besides Multilink PPP and BONDING being used?

Thanks!
Steven R. Pfister // Network Administrator
optimum.net
srp685@optimum.com

Technical Details

Message-ID: <srp336-1912951954140001@spfister.optimum.com>

Path: arc1-ca.pugleaf.net!spfister.optimum.com!user

References: <srp336-1212951858410001@spfister.optimum.com> <4b2nfu$1d1@news.worldlinx.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!spfister.optimum.com!user
From: srp336@optimum.com (Steven R. Pfister)
Newsgroups: comp.dcom.sys.cisco,comp.dcom.isdn
Subject: Re: ISDN BRI B-Channel aggregation
Date: Tue, 19 Dec 1995 19:54:14 -0500
Organization: Optimum Group
Message-ID: <srp336-1912951954140001@spfister.optimum.com>
References: <srp336-1212951858410001@spfister.optimum.com> <4b2nfu$1d1@news.worldlinx.com>
NNTP-Posting-Host: 198.81.219.146

Reply to Parent Message