🚀 go-pugleaf

hi

a config fragment might look like:
!
! translate x25 to TCP/IP
!
int ethernet0
 ip address 192.168.1.1 255.255.255.0
!
interface Serial0
 no ip address
 encapsulation x25
 x25 address 9991
 x25 htc 5
!
translate x25 9991 tcp 192.168.1.2

for a description of the protocol translation look at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_
cr/dial_c/dcprt2/dcpt.htm#34415

hint: the config command "translate" ist NOT part of IP or IP-Plus
feature, i suppose you need Enterprise

regards
Hansrudolf


In article <8F6479B6Dpbuickbelayenterpris@198.80.55.10>,
  nospam@telusplanet.net (Patrick Buick) wrote:
> While I don't know the answer, I'll do my best to say what I think he
is
> asking.
>
> diamondtek@mindspring.com (Ken Felix) wrote in
> <395D6C2F.BE09099B@mindspring.com>:
>
> >JCoyne wrote:
> >
> >> In English:
> >> What did he say??
> >>
> >> syco <sycoweb@chez.com> wrote in message
> >> news:8jhh27$9nc$1@pollux.ip-plus.net...
> >> > In English :
> >> > I intended to speak about a possibility of connecting X25 remote
> >> > stations
> >> on
> >> > a central IP Host, by total translation of flows from X25 to IP.
> >> > One says to me that this functionality would exist well, under
term
> >> > ' TPDU' on MOTOROLA routers (?  and lately also on Cisco (!!
with
> >> > name 'TRANSLATE'. Who has water for my mill within this domain ?
> >> > Personally I knew by Cisco only XOT (X25 Over Tcp/Ip:  RFC 1613),
> >> > and
> >> still
> >> > :  only to convey X25 on the network, not going in TCP/IP in the
> >> > application; what would be formidable for me !
> >> > If happiness exists in this domain, thank you if you know how to
do.
>
> He wants to have remote X.25 stations coming into a central IP host
via
> translation of the X.25 into IP in order to attach to the
application.  He
> only knows about the XOT on Cisco, which isn't what he needs.
>
> As this is not within my knowledge yet, I'll defer to the more
> knowledgeable in the group, but my initial thoughts are that the
remote
> stations will have to tunnel IP into X.25 for this to work, but
perhaps
> not.
>
> >> >
> >> > In French :
> >> > J'ai entendu parler d'une possibilit� de connecter des distants
X25
> >> > sur un central IP, par translation totale des flux X25 en IP.
> >> > On me dit que cette fonctionnalit� existerait bien, sous le
vocable
> >> > 'TPDU' sur des routeurs MOTOROLA ( ? ) et derni�rement aussi sur
> >> > CISCO ( !! )
> >> avec
> >> > l'appellation 'TRANSLATE'.
> >> >
> >> > Qui a de l'eau pour mon moulin dans ce cadre ?
> >> >
> >> > Personnellement je ne connaissait chez CISCO que XOT ( X25 Over
> >> > Tcp/Ip :
> >> RFC
> >> > 1613 ),
> >> > et encore : uniquement pour v�hiculer X25 sur le r�seau, sans
aller
> >> > en IP jusqu'� l'application; ce qui serait formidable pour moi !
> >> >
> >> > Si le bonheur existe dans ce domaine, merci si vous savez
comment y
> >> > parvenir.
> >> >
> >> >
> >> > --
> >> > SYCO
> >> > de Sycoweb
> >> > ( BROCANTES DU NORD-EST
http://www.chez.com/sycoweb/puces/index.htm
> >> > ) - Let me Alone but not Forever -
> >> >
> >> >
> >
> >I think he is asking can  x.25 be tunnel thru cisco and motorola and
the
> >answer is yes for both. Motorola Vanguard and cisco routers can
handle
> >XOT.
> >
> >setup and configuration examples;
> >
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx
25
> >.htm#xtocid2349648
> >
> >
> >
> >
> >
>
>


Sent via Deja.com http://www.deja.com/
Before you buy.