🚀 go-pugleaf

Hi,
as i write my running-config to NVRAM i have the following message:
router#wr
Building configuration...

% Warning: Saving this config to nvram may corrupt any network management or
security files stored at the end of nvram.
Continue? [no]: no
% Configuration buffer full, can't add command: access-list 106
% Aborting Save. Compress the config.[OK]
router#

Is it really dangerous to answer Continue YES?
What can i do?
Thanks,
Giorgio


router>sho ver
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-SY-M), Version 12.1(5)T,  RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 11-Nov-00 01:46 by ccai
Image text-base: 0x02005000, data-base: 0x027BF6F8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T,  RELEASE SOFTWARE
(fc1)

router uptime is 4 days, 19 hours, 35 minutes
System returned to ROM by power-on
System restarted at 14:59:00 CET Wed Mar 21 2001
System image file is "flash:c1600-sy-mz.121-5.T.bin"

cisco 1601 (68360) processor (revision C) with 12288K/4096K bytes of memory.
Processor board ID 17544042, with hardware revision 00000002
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
System/IO memory with parity disabled
8192K bytes of DRAM onboard 8192K bytes of DRAM on SIMM
System running from RAM
7K bytes of non-volatile configuration memory.
8192K bytes of processor board PCMCIA flash (Read/Write)

Configuration register is 0x2102

router>