🚀 go-pugleaf

There are several ways out of this..

1) compress the config "service  compress-config" global config command

2) save the running config to flash "copy run flash: name" exec command

"Giorgio Giorgetti - DEEI" <giorgio.giorgetti@deei.units.it> wrote in
message news:99mvl9$7q3$1@news.cineca.it...
> Hi,
> as i write my running-config to NVRAM i have the following message:
> router#wr
> Building configuration...
>
> % Warning: Saving this config to nvram may corrupt any network management
or
> security files stored at the end of nvram.
> Continue? [no]: no
> % Configuration buffer full, can't add command: access-list 106
> % Aborting Save. Compress the config.[OK]
> router#
>
> Is it really dangerous to answer Continue YES?
> What can i do?
> Thanks,
> Giorgio
>
>
> router>sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) 1600 Software (C1600-SY-M), Version 12.1(5)T,  RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Sat 11-Nov-00 01:46 by ccai
> Image text-base: 0x02005000, data-base: 0x027BF6F8
>
> ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)
> ROM: 1600 Software (C1600-RBOOT-R), Version 12.0(3)T,  RELEASE SOFTWARE
> (fc1)
>
> router uptime is 4 days, 19 hours, 35 minutes
> System returned to ROM by power-on
> System restarted at 14:59:00 CET Wed Mar 21 2001
> System image file is "flash:c1600-sy-mz.121-5.T.bin"
>
> cisco 1601 (68360) processor (revision C) with 12288K/4096K bytes of
memory.
> Processor board ID 17544042, with hardware revision 00000002
> Bridging software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 Serial(sync/async) network interface(s)
> System/IO memory with parity disabled
> 8192K bytes of DRAM onboard 8192K bytes of DRAM on SIMM
> System running from RAM
> 7K bytes of non-volatile configuration memory.
> 8192K bytes of processor board PCMCIA flash (Read/Write)
>
> Configuration register is 0x2102
>
> router>
>
>