Re: problem with rip

Article View: comp.dcom.sys.cisco

Article #256

Back to comp.dcom.sys.cisco Previous Next

#256

From: Sam Wilson
Date: Thu, 20 Aug 1992 08:27

19 lines
1288 bytes

> From:     Ralph Steigrad <rst@ch.sma.maz>
> Subject:  problem with rip
> 
>  We have a strange problem with our router MGS 2E6T.
>  On one serial link we are connectet to a partner in London. On this link
>  we use static routing with RIP. ...
>   [[[ and the static route flips to another interface ]]]

Your description of the problem isn't quite definitive, but I bet you
aren't running 8.2(8) or 8.3(3) or 9.0(1) on the router with the
flipping route.  There is a known problem in earlier versions whereby if
an interface with a static route defined over it goes down the route
flips to another interface instead of disappearing.  It isn't just the
routing table, the running config gets changed too!

Sam Wilson
Network Services Division
Computing Services, The University of Edinburgh
Edinburgh, Scotland, UK

Technical Details

Message-ID: <9208200927.aa24206@uk.ac.ed.festival>

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!ames!agate!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!ames!agate!boulder!recnews
From: Sam Wilson <ercm20@festival.ed.ac.uk>
Subject: Re: problem with rip
In-Reply-To: Your message <9208191403.AA26069@maz3>
Message-ID: <9208200927.aa24206@uk.ac.ed.festival>
Sender: news@colorado.edu
Reply-To: Sam_Wilson@edinburgh.ac.uk
Date: 20 Aug 92 09:27:12 BST
Via: uk.ac.edinburgh.festival; Thu, 20 Aug 1992 09:27:18 +0100
Lines: 19