Token-Ring not reset after beaconing

Article View: comp.dcom.sys.cisco

Article #257

Back to comp.dcom.sys.cisco Previous Next

#257

From: William Rippon
Date: Thu, 20 Aug 1992 15:11

14 lines
829 bytes

Hello,
  I believe I have seen this problem mentioned before and I am
wondering if there is a fix yet.
  I am running GS3-BFX 9.0(1) in an AGS+. On several occasions
a beaconing condition on the token-ring has caused the token-ring
interface on the cisco to go down. The interface does not reset
automatically, but must be manually reset via software
(shutdown, no shutdown).
Thanks,
  Bill

Bill Rippon         Phone: 914-784-7479
IBM Watson Research Center     Email: bjripp@watson.ibm.com

Technical Details

Message-ID: <9208201411.AA12288@firehawk.watson.ibm.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!ames!agate!boulder!recnews

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!ames!agate!boulder!recnews
From: William Rippon <bjripp@watson.ibm.com>
Subject: Token-Ring not reset after beaconing
Message-ID: <9208201411.AA12288@firehawk.watson.ibm.com>
Sender: news@colorado.edu
Date: 20 Aug 92 10:11:24 -0500
Lines: 14