Article View: comp.dcom.sys.cisco
Article #269Re: SMDSs & cisco
From: Peter Corless
Date: Thu, 27 Aug 1992 04:42
Date: Thu, 27 Aug 1992 04:42
22 lines
1418 bytes
1418 bytes
In response to the following post: From: battle@umbc4.umbc.edu (Rick) Subject: SMDSs & cisco > Are there any cisco models which will not support SMDS? > I know the AGS+ is ok, what about the rest of the product line? All current models of the AGS+, AGS, MGS, CGS, IGS, and Cisco 3000 support SMDS, as long as they are using Software Release 8.3 or 9.0. They can either use a CSC-MCI or CSC-SCI (with RS-449 applique), an HSSI interface (in the AGS+ only), or an RS-449 transition cable (for an IGS or 3000 model). At your service! -Peter Corless. Cisco Customer Service US Federal Region Representative -------------------------------- e-mail: pcorless@cisco.com phone: (415) 903-8723 fax: (415) 903-8080
Technical Details
Message-ID:
<1992Aug27.044234.26445@csl.sri.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!ucbvax!nisc.sri.com!csl!newsReferences:
<1992Aug25.235612.28179@umbc3.umbc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!ucbvax!nisc.sri.com!csl!news
From: pcorless@cisco.com (Peter Corless)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: SMDSs & cisco
Message-ID: <1992Aug27.044234.26445@csl.sri.com>
Date: 27 Aug 92 04:42:34 GMT
References: <1992Aug25.235612.28179@umbc3.umbc.edu>
Sender: news@csl.sri.com (NEWS Administrator)
Reply-To: pcorless@cisco.com (Peter Corless)
Organization: Computer Science Lab, SRI International
Lines: 22
X-Disclaimer: The views expressed in this message are those of an
individual at SRI International, and do not necessarily
reflect those of the company.
Nntp-Posting-Host: corless-mac.cisco.com