Advertising Static routes

Article View: comp.dcom.sys.cisco

Article #270

Back to comp.dcom.sys.cisco Previous Next

#270

From: Glyn Simpson
Date: Mon, 07 Sep 1992 15:59

18 lines
1145 bytes

Can anyone tell me out there whether it is possible to advertise static
routes which have:
	1. Been defined as secondary addresses on an interface
	2. Been defined using the 'IP ROUTE' command and a weight.

I've tried and tried this, and am coming to the conclusion that its not
possible.

We've got an AGS+ running software version 8.2 (7). The routes I am
trying to advertise are subnets of a network - i'd like to redistribute these
addresses to the other subnets.

Thanks in advnace.

--
Glyn Simpson, Systems Officer,  //  Voice: +44 (0) 21 414 6575
University of Birmingham        //  Fax:   +44 (0) 21 414 3952
Email: G.Simpson@bham.ac.uk     //  NIC Handle: GS56

Technical Details

Message-ID: <1992Sep07.155935.14888@rs6000.bham.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!bham!dns0.bham.ac.uk!simpsong

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!bham!dns0.bham.ac.uk!simpsong
From: simpsong@dns0.bham.ac.uk (Glyn Simpson)
Subject: Advertising Static routes 
Sender: usenet@rs6000.bham.ac.uk (USENET News Service)
Message-ID: <1992Sep07.155935.14888@rs6000.bham.ac.uk>
Date: Mon, 07 Sep 1992 15:59:35 GMT
Reply-To: G.Simpson@bham.ac.uk
Organization: The University of Birmingham, England
X-Newsreader: Tin 1.1 PL5
Lines: 18