Re: Advertising Static routes

Article View: comp.dcom.sys.cisco

Article #271

Back to comp.dcom.sys.cisco Previous Next

#271

From: Paul Traina
Date: Mon, 07 Sep 1992 17:36

18 lines
1131 bytes

In article <1992Sep07.155935.14888@rs6000.bham.ac.uk> G.Simpson@bham.ac.uk writes:
>Can anyone tell me out there whether it is possible to advertise static
>routes which have:
>	1. Been defined as secondary addresses on an interface
>	2. Been defined using the 'IP ROUTE' command and a weight.

try 'redistribute static'

as in

router rip
network x.x.x.x
redistribute static
-- 
"If life were fair, the acquisition of a large bosom or a massive inheritance
 would have no bearing on your ability to attract the opposite sex, and Dan
 Quayle would be making a living asking runny-nosed children, `Do you want
 fries with that?'"     -- John Cleese, "Corporate Computing" magazine

Technical Details

Message-ID: <1992Sep7.173610.7242@morrow.stanford.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!morrow.stanford.edu!pst

References: <1992Sep07.155935.14888@rs6000.bham.ac.uk>

Show Full Headers

Complete Article Headers

Newsgroups: comp.dcom.sys.cisco
Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!morrow.stanford.edu!pst
From: pst@cisco.com (Paul Traina)
Subject: Re: Advertising Static routes
Message-ID: <1992Sep7.173610.7242@morrow.stanford.edu>
Sender: news@morrow.stanford.edu (News Service)
Organization: cisco Systems, Menlo Park, California, USA
References: <1992Sep07.155935.14888@rs6000.bham.ac.uk>
Date: Mon, 7 Sep 1992 17:36:10 GMT
Lines: 18

Reply to Parent Message