🚀 go-pugleaf

I have an 80 port ASM with a CSC/2 processor board, no NVRAM.

I am experiencing intermittent system restarts due to 'power on' according
to the 'show hardware' command.

I'm not sure if the problem is with the power supply or the processor board.
The AC line has been eliminated.

Are there any easily accessible DC test points on the ASM?  The unit is
currently rack mounted which makes access to the power supply rather
difficult.  If no easily accessible test points are available, are there any
on the power supply itself that can be accessed without removing the power
supply from the chassis?

Any information relative to this, or intermittent (approx once a week, now
down to every couple of hours) system restarts would be appreciated.

-dean
-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-
Dean Ter Haar
Computer Technician, Data Communications Specialist

Computer Center                             Ma Bell: (616) 957-6144
Calvin College                              Fax:     (616) 957-8551
3201 Burton St. SE                          Email:   dean@calvin.edu
Grand Rapids, MI 49546
-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-=*=-