🚀 go-pugleaf

We are seeing intermittent delays for Decnet traffic which is going across
two routers. Intermittent delay (2-5 second) meaning cursor hangs while 
editing or screen hangs while scrolling. I have been told that Cisco's do 
not do bridging and routing well at tha same time, but its hard to digest. 
Does someone have a better answer/or faced a similar situation. 
I could post a more detailed description (config info etc..) if you need.

Thanks,
Sunil.

PS. Please e-mail responses. 



The problem picture is as follows:


                        |
                        |         Non Routed segment
                        +[Bridge]+---------------- 128.215.x.x 
                        |
                 (Bridged Network) 
                        |
                        |128.215.98.251/143.183.145.251(secondary)
                    +---+----+
                    |AGS+    | Router A /Bridging DECnet/Routing IP
                    |8.3(1)  |
                    |GS3-BF  |
                    +---+----+
                        |143.183.1.1
                        |
                        |143.183.1.2
                    +---+----+
                    |AGS+    | Router B/Routing Decnet/Routing IP
                    |8.3(1)  |
                    |GS3-BF  |
                    +-+------+
                      |
                      | Segment 143.183.12.0 seeing delays.
                      | talking to VMS nodes on seg. 128.215.x.x across 
                      | routers A-B